Evaluation and Tabulation of Myriad Types of Multiport Converters on Renewable Energy

International Journal of Electrical and Electronics Engineering
© 2020 by SSRG - IJEEE Journal
Volume 7 Issue 3
Year of Publication : 2020
Authors : P.Shivani, B. Swetha Vilashini
pdf
How to Cite?

P.Shivani, B. Swetha Vilashini, "Evaluation and Tabulation of Myriad Types of Multiport Converters on Renewable Energy," SSRG International Journal of Electrical and Electronics Engineering, vol. 7,  no. 3, pp. 18-23, 2020. Crossref, https://doi.org/10.14445/23488379/IJEEE-V7I3P104

Abstract:

This paper presents a review on what a multiport converter is and its pros & cons. It discusses about the types of multiport converters present and those that have been developed in recent times. The efficient use of such converter in different types of renewable energy like solar and wind are laid out. For better understanding, a brief description based on the types of renewable energies is also added. Circuit and block diagram are added to give a vivid picture. Finally, the paper also gives a comparative study on the converters present in the current day based on efficiency, duty cycle and various other parameters.

Keywords:

multiport isolated converter with and without transformer-multiport non-isolated converter-maximum power point tracking-comparative study about converters

References:

[1] “An Isolated Multiport DC–DC Converter for Simultaneous Power Management of Multiple Different Renewable Energy Sources Jianwu Zeng”, Student Member, IEEE, Wei Qiao, Senior Member, IEEE, Liyan Qu, Member, IEEE, and Yanping Jiao, Student Member, IEEE
[2] H. Matsuo, T. Shigemizu, F. Kurokawa, and N. Watanabe, “Characteristics of the multiple-input DC-DC converter,” IEEE Trans. Ind. Electron., vol. 51, no. 3, pp. 625–631, Jun. 2004.
[3] Y. Chen, Y. Liu, and F. Wu, “Multi-input DC/DC converter based on the multi -winding transformer for renewable energy applications,” IEEE Trans. Ind. Appl., vol. 38, no. 4, pp. 1096–1104, Aug. 2002.
[4] X. Sun, G. Pei, S. Yao, and Z. Chen, “A novel multi-port DC/DC converter with bi-directional storage unit,” in Proc. Int. Power Electron. Motion Control Conf., Jun. 2012, pp. 1771–1775.
[5] Ardi, H., Ajami, A., Kardan, F., et al.: ‘Analysis and implementation of a nonisolated bidirectional DC–DC converter with high voltage gain’, IEEE Trans. Ind. Electron., 2016, 63, 4878–4888, early access
[6] Bin, W., Shouxiang, L., Yao, L., et al.: ‘A new hybrid boosting converter for renewable energy applications’, IEEE Trans. Power Electron., 2016, 31, pp.
[7] “Design, analysis, and implementation of a multiport DC–DC converter for renewable energy applications” ISSN 1755-4535 Received on 1st July 2018 Revised 1st November 2018 Accepted on 20th November 2018
[8] Tseng, K.C., Huang, C.C.: ‘High step-up, high efficiency interleaved converter with voltage multiplier module for renewable energy system’, IEEE Trans. Ind. Electron., 2014, 61, (3), pp. 1311–1319
[9] Loredana Cristaldi, Senior Member, IEEE, Marco Faifer, Member, IEEE,Marco Rossi, Student Member, IEEE, and Sergio Toscani, Member, IEEE , "An Improved Model-Based Maximum Power PointTracker for Photovoltaic Panels" in IEEE Transactions on Instrumentation and Measurement, vol. 63, no. 1, January 2014
[10 ]J.-M. Shen1 H.-L. Jou1 J.-C. Wu2,"Transformer-less three-port grid-connected power converter for distribution power generation system with dual renewable energy sources '',Published in IET Power Electronics Received on 27th April 2011
[11] Hongyu Zhu, Student Member, IEEE, Zhang, Member, IEEE,Hussain S. Athab, Senior Member, IEEE, Bin Wu, Fellow, IEEE, and Yu Gu, Student Member, IEEE , ''PV Isolated Three-Port Converter and Energy-Balancing Control Method for PV-BatteryPower Supply Applications'', in IEEE Transactions on Industrial Electronics, vol. 62, no. 6, June 2015
[12] Muhammad Yasir Ali Khan, Laraib Saeed,Jawad Saleem, Muhammad Arif, and Abdul Majid , in "A High Gain Multi-Port Bidirectional Non-Isolated DC-DC Converter for Renewable Integration", 2018 International Conference on Computing, Mathematics and Engineering Technologies – iCoMET 2018
[13] Hongfei Wu, Peng Xu, Haibing Hu, Member, IEEE, Zihu Zhou, and Yan Xing, Member, IEEE , in " Multiport Converters Based on Integration of Full-Bridge and Bidirectional DC–DC Topologies for Renewable Generation Systems " , IEEE Transactions on Industrial Electronics, vol. 61, no. 2, February 2014
[14] Sarab Jwaid Al-Chlaihawi, Ph.D. Student , " Comparative study of the Multiport Converter used in Renewable Energy Systems"
[15] P.Bauer, Yi Zhou, J. Doppler, N. Stembridge, and Y.Zhou, “Charging of electric vehicles and impact on the grid,” in Proceedings of 13thInternational Symposium on Mechatronics, MECHATRONIKA, 2010,pp. 121–127.
[16] M.Venmathi, R.Ramaprabha, "Analysis of Three Port Full Bridge and Half Bridge DC-DC Converter Interfacing Renewable Energy System" Advanced Materials Research Vol. 768 (2013) pp3-8.
[17] Xavier Francis St-Onge , Student Member, IEEE, Christian Richard , Student Member, IEEE,Katie M. McDonald, Student Member, IEEE, and Saleh S. A. Saleh, Senior Member, IEEE , in " Performance Testing of an Active Multiport DC Linkfor Grid-Connected PMG-Based WECSs", IEEE Transactions on Industry Applications, vol. 54, no. 6, November/December 2018
[18] Amir Farakhor, Mehdi Abapour, Mehran Sabahi ,Department of Electrical and Computer Engineering, University of Tabriz, Tabriz, Iran in , "Design, analysis, and implementation of a multiport DC–DC converter for renewable energy applications" , ISSN 1755-4535 , Received on 1st July 2018 ,Revised 1st November 2018 , Accepted on 20th November 2018 ,E-First on 11th January 2019
[19] C. Hua, J. Lin, and C. Shen, “Implementation of a DSP-controlled photovoltaic system with peak power tracking,” IEEE Trans. Ind. Electron.,vol. 45, no. 1, pp. 99–107, Feb. 1998.
[20] ] Q. Li and P. Wolfs, “A review of the single phase photovoltaic module integrated converter topologies with three different DC link configurations,” IEEE Trans. Power Electron., vol. 23, no. 3, pp. 1320 1333 , May 2008