Call For Paper - Upcoming Conferences
Research Article | Open Access | Download PDF
Volume 13 | Issue 5 | Year 2026 | Article Id. IJCE-V13I5P123 | DOI : https://doi.org/10.14445/23488352/IJCE-V13I5P123

Influence of Damping on the Seismic Response of High-Rise Reinforced Concrete Buildings

Víctor Hinostroza Maraví, Benjamin De la Cruz Taipe, Jean Fernando Pérez Montesinos

Received Revised Accepted Published
16 Oct 2025 20 Jan 2026 29 Apr 2026 29 May 2026

Citation :

Víctor Hinostroza Maraví, Benjamin De la Cruz Taipe, Jean Fernando Pérez Montesinos, "Influence of Damping on the Seismic Response of High-Rise Reinforced Concrete Buildings," International Journal of Civil Engineering, vol. 13, no. 5, pp. 349-357, 2026. Crossref, https://doi.org/10.14445/23488352/IJCE-V13I5P123

Abstract

Recent earthquakes have highlighted that, in addition to their strength, the seismic resistance of reinforced concrete buildings is related to their ability to dissipate energy (damping). In engineering practice, the most common approach for the critical damping in dynamic analysis is to consider a reference value of 5% in building codes, but some experimental and analytical research have shown that the real values in reinforced concrete buildings often have a damping ratio in the range of 2% and 3%. This may result in an underestimation or overestimation of the seismic demand, affecting the safety and economic aspects of the structure. This paper aims to determine the effect of the damping ratio on the seismic performance of reinforced concrete buildings, considering the 5% normative as a reference. A numerical study was conducted with ETABS software for a 17-floor and 4-basement level building in Lima, Peru. The structure was modelled as a reinforced concrete shear wall, with overall damping ratios set at 2%, 3%, 4% and 5%. Loads were evaluated considering the E.020 code (gravitational loads) and E.030 code (seismic loads), using the modal response spectrum, with accidental eccentricities in both directions. It was found that decreasing the damping ratio from 5% to 2% caused substantial increases in structural response. Displacements increased from 252 mm to 310 mm, interstory drift from 0.0053 to 0.0066, and base shear from 632 tonf to 805 tonf, with the largest changes in the Y-axis. The results verified the effects of changing the damping ratio on the seismic response and also demonstrate the need to use more realistic values. The findings of this research offer quantitative data that can inform seismic design practices in order to improve safety and economy. The main weakness of this research is that the analyses were linear and only one building typology was considered; for this reason, future studies should consider nonlinear analyses and other structural typologies, increasing the generalisation potential of these findings.

Keywords

Reinforced concrete buildings, Seismic damping, Structural response, Interstory drift, Base shear.

References

  1. Chaofeng Liang et al., “Relationship between Internal Viscous Damping and Stiffness of Concrete Material and Structure,” Structural Concrete, vol. 22, no. 3, pp. 1410-1428, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  2. Vladimir Smirnov, and Michail Smolyakov, “Experimental Method for Structural Concrete Damping Properties Evaluation,” International Journal for Computational Civil and Structural Engineering, vol. 18, no. 4, pp. 14-22, 2022.
    [    CrossRef] [Google Scholar] [Publisher Link]
  3. EmreÇağlar Çelik, and Onur Merter, “An Investigation of Damping Modification Factors Corresponding to Different Damping Ratios for SDOF Systems,” Civil Engineering Journal, vol. 31, pp. 1-12, 2023.
    [    CrossRef] [Google Scholar] [Publisher Link]
  4. Stipe Perišić et al., “Automatic Damping Estimation via Bootstrap Technique and Bayesian Analysis for Mechanical System Condition Monitoring,” Mechanical Systems and Signal Processing, vol. 220, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  5. Mohammad Reza Khosravi et al., “A Study of Progressive Collapse in Moment-Resisting Reinforced Concrete Structures Considering Damping Ratio,” Iranian Journal of Science and Technology, Transactions of Civil Engineering, vol. 48, pp. 3323-3337, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  6. G. Rebecchi et al., “Full-Scale Shake Table Tests of a Reinforced Concrete Building Equipped with a Novel Servo-Hydraulic Active Mass Damper,” Journal of Earthquake Engineering, vol. 27, no. 10, pp. 2702-2725, 2023.
    [    CrossRef] [Google Scholar] [Publisher Link]
  7. Luca Verrucci et al., “Damping Formulations for Finite Difference Linear Dynamic Analyses: Performance and Practical Recommendations,” Computers and Geotechnics, vol. 142, 2022.
    [    CrossRef] [Google Scholar] [Publisher Link]
  8. Rory Cordero, Gilberto Leiva, and Marcial Baeza, “Damage Analysis of a Reinforced Concrete Building in Santiago During the Earthquake of February 27, 2010,” Works and Projects, no. 35, pp. 65-75, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  9. Samaniego Palomino, Juan Diego Ricardo, “Experimental Analysis of the Behavior of Reinforced Concrete Beams Strengthened with CFRP Strips under Quasi-Static Cyclic Reversed Actions,” Master’s Thesis, Pontifical Catholic University of Peru, pp. 1-169, 2021.
    [    Google Scholar] [Publisher Link]
  10. Manuel Antonio Cando Loachamin, “Effect of Stiffness on the Seismic Performance of Buildings Structured with Reinforced Concrete Walls,” Doctoral Tesis, Pontifical Catholic University of Chile, 2020.
    [    Google Scholar] [CrossRef] [Publisher Link]
  11. Hao Jin et al., “Effect of Rubber Surface Treatment on Damping Performance of Rubber-Mortar ITZ in Rubberized Concrete,” Journal of Building Engineering, vol. 83, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  12. Payal Gwalani, and Yogendra Singh, “Performance-Based Seismic Design of RC Structures,” Theory and Practice in Earthquake Engineering and Technology, pp. 309-330, 2023.
    [    CrossRef] [Google Scholar] [Publisher Link]
  13. G.M. Calvi, M.J.N. Priestley, and M.J. Kowalsky, “Displacement-Based Seismic Design of Structures,” Earthquake Spectra, vol. 24, no. 2, 2008.
    [    CrossRef] [Google Scholar] [Publisher Link]
  14. A. Benavent-Climent, “Influence of Hysteretic Dampers on the Seismic Response of Reinforced Concrete Wide Beam–Column Connections,” Engineering Structures, vol. 28, no. 4, pp. 580-592, 2006.
    [    CrossRef] [Google Scholar] [Publisher Link]
  15. George A. Papagiannopoulos, “On the Modal Damping Ratios of Mixed Reinforced Concrete – Steel Buildings,” Soil Dynamics and Earthquake Engineering, vol. 178, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  16. Ragi Krishnan, and Vidhya Lakshmi Sivakumar, “Profound Impact of Shear Wall on Stability of Regular and Irregular Reinforced Concrete Structures – A Review,” Materials Today: Proceedings, 2023.
    [    CrossRef] [Google Scholar] [Publisher Link]
  17. Fernando Fuentes et al., “Determining the Dynamic Characteristics of a Multi-Story RC Building Located in Chile: A Comparison of the Results between the Nonparametric Spectral Analysis Method and the Parametric Stochastic Subspace Identification Method,” Applied Sciences, vol. 12, no. 15, pp. 1-20, 2022.
    [    CrossRef] [Google Scholar] [Publisher Link]
  18. Jorge Enrique Lucen Gómez, and Yerko Anthony Samokic Quiquia,, “Comparative Structural Analysis and Design of a Ten-Story Reinforced Concrete Building with Fixed and Isolated Foundations,” Thesis, Pontifical Catholic University of Peru, pp. 1-166, 2018.
    [    Google Scholar] [Publisher Link]
  19. Cinthia Raquel Soto Raico, and Anita Elizabet Alva Sarmiento, “Comparison of Seismic Analysis Using Different Percentages of Structural Damping,” Latin American and Caribbean Consortium of Engineering Institutions, pp. 1-8, 2022.
    [    CrossRef] [Publisher Link]
  20. Solorio Quintana et al., Experimental Determination of Structural Damping of a Masonry Building, Academia. [Online]. Available: https://www.academia.edu/36510145/Determinaci%C3%B3n_experimental_del_amortiguamiento_estructural_de_un_Edificio_de_Mamposter%C3%ADa
  21. Taehyu Ha, Seung-Hoon Shin, and Hongjin Kim, “Damping and Natural Period Evaluation of Tall RC Buildings Using Full-Scale Data in Korea,” Applied Sciences, vol. 10, no. 5, pp. 1-16, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  22. Francisco J. Pallarés et al., “Experimental and Analytical Assessment of the Influence of Masonry Façade Infills on Seismic Behavior of RC Frame Buildings,” Engineering Structures, vol. 235, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  23. Victor I. Fernandez-Davila, and Arnold R. Mendo, “Damping Modification Factors for the Design of Seismic Isolation Systems in Peru,” Earthquake Spectra, vol. 36, no. 4, pp. 2025-2085, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  24.  ETABS, Csiespana. [Online]. Available: http://www.csiespana.com/software/5/etabs
  25. Ahed Habib, Umut Yildirim, and Ozgur Eren, “Seismic Behavior and Damping Efficiency of Reinforced Rubberized Concrete Jacketing,” Arabian Journal for Science and Engineering, vol. 46, pp. 4825-4839, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  26. Standard E.030 Seismic-resistant Design, National Building Regulations, pp. 1-81, 2020. [Online]. Available: https://drive.google.com/file/d/1W14N6JldWPN8wUZSqWZnUphg6C559bi-/view
  27. Standard E.020 Loads, National Building Regulations, pp. 1-29, 2020. [Online]. Available: https://drive.google.com/file/u/1/d/15atg-9w0OEXjR5C1m6IXUFihwYeUh1aN/view?usp=sharing&usp=embed_facebook
  28. Emrah Erduran, “Evaluation of Rayleigh Damping and Its Influence on Engineering Demand Parameter Estimates,” Earthquake Engineering & Structural Dynamics, vol. 41, no. 14, pp. 1905-1919, 2012.
    [    CrossRef] [Google Scholar] [Publisher Link]
  29. Jonathan Pulido, Structural Dynamics, 4ed Anil K. Chopra, Academia, 2026. [Online]. Available: https://www.academia.edu/36451323/Dinamica_de_Estructuras_4Ed_Anil_K_Chopra
  30. Koichi Morita, “Damping Ratio Estimation of an Existing 8-story Building Considering Soil-Structure Interaction Using Strong Motion Observation Data,” Building Research Institute, pp. 1-8, 2006.
    [    Google Scholar] [Publisher Link]
  31. Rafael Salinas-Basualdo, Mario E. Rodríguez, and y Roque A. Sánchez, “Vibrating Table Tests of Miniature Buildings with Conventional and Self-Centering Concrete Structural Walls,” Seismic Engineering, no. 89, pp. 101-134, 2013.
    [    Google Scholar] [Publisher Link]
  32. ASCE/SEI 7-22, “Front Matter for Minimum Design Loads and Associated Criteria for Buildings and Other Structures,” Minimum Design Loads and Associated Criteria for Buildings and Other Structures, pp. 1-60, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  33. P. Bisch et al., “Eurocode 8: Seismic Design of Buildings,” Publications Office of the European Union, 2012.
    [    Google Scholar] [Publisher Link]
  34. N. Nakamura et al., “Initial Damping Ratio for the Seismic Design of Buildings,” 17th World Conference on Earthquake Engineering, Sendai, Japan, 2020.
    [    Google Scholar] [Publisher Link]
  35. Pengfei Ma, and Shangke Yuan, “Seismic Retrofitting of RC Frames Using Viscous Dampers: Numerical Simulation and Nonlinear Response Analysis,” Infrastructures, vol. 10, no. 9, pp. 1-18, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]