Citation :

Kobe Samuel Mojapelo, Everardt Andre Burger, Jacques Snyman, Idowu David Ibrahim, Charity Maepa, "Optimising Incineration Parameters of Wastewater Sludge Ash Production for a Sustainable Environment and Construction Materials," International Journal of Civil Engineering, vol. 13, no. 10, pp. 62-69, 2026. Crossref, https://doi.org/10.14445/23488352/IJCE-V13I10P104

Abstract

South Africa produces approximately 639,000 dry tonnes of wastewater sludge annually, creating disposal challenges and opportunities for resource recovery through Wastewater Sludge Ash (WSA). This study optimised and interpreted the thermal conversion of Polokwane Wastewater Sludge (WWS) to WSA by evaluating atmosphere and heating rate-dependent decomposition, as well as kinetic and thermodynamic parameters. Thermogravimetric analyses were conducted to 900 °C at 10, 20 and 40 °C/min under air and nitrogen (N2). Three decomposition stages were identified: moisture loss (25-150 °C), organic decomposition (200-500 °C) and carbonate decomposition (600-900 °C), producing approximately 70% WSA in air. Coats-Redfern analysis showed higher effective activation energies in air (118.6 and 142.1 kJ/mol) than in N2 (94.8 and 107.5 kJ/mol), with strong linear fits (R2 = 0.986-0.994). Decomposition was endothermic, with a higher ΔH in air, while positive ΔG indicated non-spontaneous thermal decomposition. XRD identified quartz, calcite and haematite, with increased crystallinity at 600 °C. FTIR confirmed organic burnout at 600 °C through the disappearance of C-H and C=O/N-H bands.

Keywords

Thermal optimisation, Incineration parameters, Wastewater sludge ash, Construction materials, Quality control.

References

1. “Sludge Management Report,” pp. 28-31, 2024.
   [Publisher Link]
2. Zygmunt Kowalski et al., “Conversion of Sewage Sludge into Biofuels via Different Pathways and Their Use in Agriculture: A Comprehensive Review,” Energies, vol. 17, no. 6, pp. 1-28, 2024.
   [CrossRef] [Google Scholar] [Publisher Link]
3. Elham H. Fini et al., “Perspectives on Innovative Non-Fertilizer Applications of Sewage Sludge for Mitigating Environmental and Health Hazards,” Communications Engineering, vol. 3, no. 1, pp. 1-15, 2024.
   [CrossRef] [Google Scholar] [Publisher Link]
4. Amandeep Singh Sidhu, Rafat Siddique, and Gurpreet Singh, “Review on the Effect of Sewage Sludge Ash on the Properties of Concrete,” Construction and Building Materials, vol. 449, 2024.
   [CrossRef] [Google Scholar] [Publisher Link]
5. M. A. Tantawy et al., “Evaluation of the Pozzolanic Activity of Sewage Sludge Ash,” International Scholarly Research Notices, vol. 2012, pp. 1-8, 2012.
   [CrossRef] [Google Scholar] [Publisher Link]
6. Ruben Snellings, Prannoy Suraneni, and Jørgen Skibsted, “Future and Emerging Supplementary Cementitious Materials,” Cement and Concrete Research, vol. 171, pp. 1-23, 2023.
   [CrossRef] [Google Scholar] [Publisher Link]
7. Almotaseembillah Ahmed, “Assessing the Effects of Supplementary Cementitious Materials on Concrete Properties: A Review,” Discover Civil Engineering, vol. 1, no. 1, pp. 1-47, 2024.
   [CrossRef] [Google Scholar] [Publisher Link]
8. Rakesh Roshan Gantayat et al., “Comprehensive Source Apportionment and Health Risk Assessment of Metals Contamination with Unified Approach of Receptor Model and Monte Carlo Simulation in Limpopo, South Africa,” Exposure and Health, vol. 17, no. 6, pp. 1457-1477, 2025.
   [CrossRef] [Google Scholar] [Publisher Link]
9. Masego Montwedi et al., “Resource Recovery from and Management of Wastewater in Rural South Africa: Possibilities and Practices,” Journal of Water Process Engineering, vol. 40, pp. 1-63, 2021.
   [CrossRef] [Google Scholar] [Publisher Link]
10. Ndivhuwo R. Netshiongolwe et al., “Quantifying Metal Contamination and Potential Uptake by Phragmites Australis Adans. (Poaceae) Along a Subtropical River System,” Plants, vol. 9, no. 7, pp. 1-17, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
11. Kobe Samuel Mojapelo, Everardt Andre Burger, and Jacques Snyman, “Durability and Microstructural Performance of Concrete Incorporating Thermally Optimised Wastewater Sludge Ash from the Polokwane Wastewater Treatment Plant,” Cleaner Waste Systems, vol. 15, pp. 1-11, 2026.
    [CrossRef] [Google Scholar] [Publisher Link]
12. Paweł Wiercik et al., “Evaluation of Changes in Activated Sludge and Sewage Sludge Quality by FTIR Analysis and Laser Diffraction,” Desalination and Water Treatment, vol. 273, pp. 114-125, 2022.
    [CrossRef] [Google Scholar] [Publisher Link]
13. Georgia-Christina Mitraka et al., “Evaluation of the Optimal Sewage Sludge Pre-Treatment Technology through Continuous Reactor Operation: Process Performance and Microbial Community Insights,” Water Research, vol. 257, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]