Citation :

Subhash P. Khamkar, Kamal Kumar Ojha, "Experimental Vibration Analysis of a GFRP Mono-Composite Leaf Spring for Automotive Suspension Applications: Stiffness, Natural Frequency, and Transmissibility Evaluation," International Journal of Mechanical Engineering, vol. 13, no. 7, pp. 188-198, 2026. Crossref, https://doi.org/10.14445/23488360/IJME-V13I7P116

Abstract

In the automotive sector, the demand for composite materials within suspension systems increases day by day, as it has an advantageous combination of stiffness and low density, superior damping characteristics, and enhanced resistance to both corrosion and fatigue. This study investigates the vibrational characteristics of a mono composite leaf spring made by using Glass Fiber Reinforced Polymer (GFRP), which is the best substitute for a conventional steel leaf spring in light-duty commercial vehicles. The GFRP mono composite leaf spring, consisting optimum volume of a 60% E-glass fiber and a 40% epoxy matrix, and it was fabricated using the hand lay-up process. After that, it underwent experimental testing to determine its static Stiffness, natural frequency, and also the transmissibility. Assessment of static Stiffness was done by employing a Universal Testing Machine (UTM). Furthermore, a natural frequency characteristic was analysed by utilizing a Fast Fourier Transform (FFT) analyser, and to determine the transmissibility, a bespoke harmonic excitation system incorporating a cam–follower mechanism was utilized. The investigation reveals that the GFRP mono composite leaf spring exhibits a rigidity that is 44.14% superior, a mass reduction is 57.93%, and a natural frequency that is 49.91% elevated if compared to the steel leaf spring. Transmissibility at various frequencies indicated a substantial attenuation in transmitted vibration up to 60.60% in the GFRP mono composite leaf spring when compared with the traditional steel leaf spring. This study reveals that the GFRP mono composite leaf spring is very highly effective in vibration isolation. Consequently, the results conclude that the implementation of GFRP leaf springs in automotive applications will enhance ride comfort, reduce the chance of resonance, and improves dynamic stability.

Keywords

GFRP Composite Leaf Spring, Mono Leaf Spring, Natural Frequency, Transmissibility, Vibration Analysis, Automotive Suspension, Fft Analyser.

References

1. E. Mahdi, and A.M.S. Hamouda, “An Experimental Investigation into Mechanical Behavior of Hybrid and Nonhybrid Composite Semi-Elliptical Springs,” Materials & Design (1980-2015), vol. 52, pp. 504-513, 2013.
   [CrossRef] [Google Scholar] [Publisher Link]
2. Y.S. Kong et al., “Fatigue Life Prediction of Parabolic Leaf Spring under Various Road Conditions,” Engineering Failure Analysis, vol. 46, pp. 92-103, 2014.
   [CrossRef] [Google Scholar] [Publisher Link]
3. Jiashi Wang, Zaike Li, and Qibin Jiang, “The Analysis of Composite Leaf Spring by Finite Element Method and Experimental Measurements,” Proceedings of the FISITA 2012 World Automotive Congress, pp. 823-829, 2012.
   [CrossRef] [Google Scholar] [Publisher Link]
4. Zheng Yinhuan, Xue Ka, and Huang Zhigao, “Finite Element Analysis of Composite Leaf Spring,” 2011 6^th International Conference on Computer Science & Education (ICCSE), Singapore, pp. 316-319, 2011.
   [CrossRef] [Google Scholar] [Publisher Link]
5. Mahmood M Shokrieh, and Davood Rezaei, “Analysis and Optimization of a Composite Leaf Spring,” Composite Structures, vol. 60, no. 3, pp. 317-325, 2003.
   [CrossRef] [Google Scholar] [Publisher Link]
6. H.A. Al-Qureshi, “Automobile Leaf Springs from Composite Materials,” Journal of Materials Processing Technology, vol. 118, no. 1-3, pp. 58-61, 2001.
   [CrossRef] [Google Scholar] [Publisher Link]
7. Rama Krishna Reddy Guduru et al., “Development of Mono Leaf Spring with Composite Material and Investigating its Mechanical Properties,” Materials Today: Proceedings, vol. 45, pp. 556-561, 2021.
   [CrossRef] [Google Scholar] [Publisher Link]
8. Nishant Varma et al., “Design and Analysis of Composite Mono Leaf Spring for Passenger Cars,” Materials Today: Proceedings, vol. 46, pp. 7090-7098, 2021.
   [CrossRef] [Google Scholar] [Publisher Link]
9. Vishesh Singh, and Rastogi Vikas, “Design and Static Analysis of Mono Composite Leaf Spring Made of Various Types of Composite Materials Using Finite Element Method,” IOP Conference Series: Materials Science and Engineering: International Conference on Integrated Interdisciplinary Innovations in Engineering, Panjab University, India, vol. 1033, pp. 1-14, 2021.
   [CrossRef] [Google Scholar] [Publisher Link]
10. Shivam Aggarwal, M. L. Aggarwal, and Krishan Verma, “Optimization of Various Percentage of Fibers in Fiber Reinforced Composite Material Leaf Springs in Vehicles,” IOP Conference Series: Materials Science and Engineering: Engineering, vol. 1248, pp. 1-14, 2022.
    [CrossRef] [Google Scholar] [Publisher Link]
11. Manseok Yoon, “Enhancing GFRP Fatigue Durability for Chassis Component Applications through Glass Fiber Coupling Variation,” Heliyon, vol. 10, no. 13, pp. 1-9, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
12. Shivaji Jadhav et al., “Analysis of Vibration in Hybrid Composite Leaf Spring,” Journal of Physics: Conference Series: International Conference on ‘Advances in Mechanical Engineering’, vol. 2763, pp. 1-13, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
13. Erujala Sukruthi Priya et al., “Design and Analysis of Leaf Spring by using Composite Material,” International Journal for Research in Applied Science and Engineering Technology, vol. 9, no. 3, pp. 1075-1083, 2021.
    [CrossRef] [Google Scholar] [Publisher Link]
14. Shivam Aggarwal, Krishan Kumar, and M. L. Aggarwal, “Analysis of Glass Fiber-Reinforced Composite Leaf Springs in a Light Commercial Vehicle,” Scientific Reports, vol. 14, no. 1, pp. 1-16, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
15. Dilşad Akgümüş Gök, “Prototype Production and Investigation of Mechanical Properties of Leaf Springs used in Air Suspension Systems,” Engineering Solid Mechanics, vol. 12, no. 1, pp. 33-40, 2024.
    [CrossRef] [Google Scholar] [Publisher Link]
16. T. Keerthi Vasan, S.M. Shibi, and C.K. Tamilselvan, “Fabrication and Testing of Composite Leaf Spring using Carbon, Glass and Aramid Fiber,” Materials Today: Proceedings, vol. 21, pp. 45-51, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
17. Ganesh R. Chavhan, and Lalit N. Wankhade, “Experimental Analysis of E-glass Fiber/Epoxy Composite-Material Leaf Spring used in Automotive,” Materials Today: Proceedings, vol. 26, pp. 373-377, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
18. K. Krishnamurthy et al., “Modeling and Structural Analysis of Leaf Spring using Composite Materials,” Materials Today: Proceedings, vol. 33, pp. 4228-4232, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
19. Akash Chauhan, Manoj Kumar, and Santosh Kumar, “Fabrication of Polymer Hybrid Composites for Automobile Leaf Spring Application,” Materials Today: Proceedings, vol. 48, pp. 1371-1377, 2022.
    [CrossRef] [Google Scholar] [Publisher Link]
20. K.M. Vinay, and M. Prasanna Kumar, “Mechanical Characterization and Static Analysis of Fiber based Hybrid Composite Multi Leaf Spring,” Materials Today: Proceedings, vol. 52, pp. 1055-1061, 2022.
    [CrossRef] [Google Scholar] [Publisher Link]