Hardened State Properties of Glass Fiber Reinforced High Strength Concrete

International Journal of Civil Engineering
© 2019 by SSRG - IJCE Journal
Volume 6 Issue 5
Year of Publication : 2019
Authors : Ideh, Suanubari B., Barisua E. Ngekpe, Iboroma, Z. S. akobo
pdf
How to Cite?

Ideh, Suanubari B., Barisua E. Ngekpe, Iboroma, Z. S. akobo, "Hardened State Properties of Glass Fiber Reinforced High Strength Concrete," SSRG International Journal of Civil Engineering, vol. 6,  no. 5, pp. 50-56, 2019. Crossref, https://doi.org/10.14445/23488352/IJCE-V6I5P108

Abstract:

Plain high strength concrete is more brittle as the compressive strength increases and therefore susceptible to cracking. To overcome this, concretes are reinforced with fibers to improve their ductility, toughness and reduce cracks possibility. This study was carried out to investigate the hardened state properties of high strength concrete reinforced with alkaline resistant glass fiber at varying percentages (0.5, 1.0, 1.5, and 2.0%). In order to reduce autogenous shrinkages resulting from excess cement volume, microsilica, a cementitious material, was used as a partial replacement for cement. The Particle Packing Method mix design was adopted to design specimens to reduce the mixes' void volume. A compressive strength test was carried out on hardened concrete specimens. Results showed that the compressive strength of the concrete increase as the incorporation level of microsilica and glass fiber increase. However, a slight drop in strength was observed at 2% glass fiber inclusion. The maximum compressive strength of 130MPa was measured at 10% replacement of cement with microsilica and 1.5% inclusion of glass fiber.

Keywords:

High Strength Concrete, Compressive Strength, Glass fiber, Microsilica, Particle Packing Method

References:

[1] Salah-Eldin, A., Mohamed, H. M., Benmokrane, B. Structural performance of high strength concrete columns reinforced with glass fiber bars and ties subjected to eccentric loads. Engineering Structures. 185,(2019),286 – 300.
[2] Saleh, N., Ashour, A. Lam, D., Sheehan, T., Experimental investigation of bond behavior of two common GFRP bar types in high-strength concrete. Construction and Building Materials. 201,(2019),610 – 622.
[3] Grzymski, F., Musial, M. and Trapko, T. (2019) Mechanical properties of fiber reinforced concrete with recycled fibers. Construction and Building Materials. 198,(2019),323 –331.
[4] Rashad, A. M., Zeedan, S. R. (2011) The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load. Construction and Building Materials. 25,(2011),3098 – 3107.
[5] Mayer L. Neue Entwicklungen Beim Einsatz Von Hochleistungsheton. Presentation at the Deutschen. Betontag in Hamburg, Proceeding; (2002) [Germany].
[6] Tassew, S. T., Lubell, A. S., Mechanical properties of glass fiber reinforced ceramic concrete. Construction and Building Materials. 51(2014),215-224.
[7] Mastali, M., Dalvand, A., Sattarifard, A. R., The impact resistance and mechanical properties of reinforced self-compacting concrete with recycled glass fiber reinforced polymers. Journal of Cleaner Production. 124,(2016),312 – 324.
[8] Hasan, H. A., Sheikh, M. N. and Hadi, M. N. S., Performance evaluation of high strength concrete and steel fiber high strength concrete columns reinforced with GFRP bars and helices. Construction and Building Materials.,134,(2017),297 – 310.
[9] Trejbal J., Mechanical properties of lime-based mortars reinforced with plasma-treated glass fibers. Construction and Building Materials. 190,(2018),929 – 938.
[10] Hilles, M. M., and Ziara, M. M., Mechanical behavior of high strength concrete reinforced with glass fiber. Engineering Science and Technology, an International Journal, https://doi.org/10.1016/j.jestch.2019.01.003.
[11] Tigiri Neeka, Barisua, E. N., & Godfrey, W. J., A New Mix Design Method for Self-Compacting Concrete Based on Close Aggregate Packing Method. International Journal of Civil Engineering (SSRG – IJCE).,6(4),2019), 23– 33.