Call for Paper - Upcoming Issues

Analysis of Minimizing Iron Material Waste for Construction Work in Wetlands with Bar Bending Schedule Method

International Journal of Civil Engineering
© 2023 by SSRG - IJCE Journal
Volume 10 Issue 8
Year of Publication : 2023
Authors : Candra Yuliana, Retna Hapsari Kartadipura, Mutiara Nursalsadilla S., Sherina Harti S. M.
10.14445/23488352/IJCE-V10I8P101
pdf
How to Cite?

Candra Yuliana, Retna Hapsari Kartadipura, Mutiara Nursalsadilla S., Sherina Harti S. M., "Analysis of Minimizing Iron Material Waste for Construction Work in Wetlands with Bar Bending Schedule Method," SSRG International Journal of Civil Engineering, vol. 10,  no. 8, pp. 1-9, 2023. Crossref, https://doi.org/10.14445/23488352/IJCE-V10I8P101

Abstract:

The components of the material structure that are important in calculating requirements are iron requirements because iron requirements have a high value in construction work. Iron requirements such as reinforcing columns, beams, pile caps, sloofs, and others are widely used for reinforcement. The research aims to determine the need for stirrup reinforcement using a method based on field data with the Bar Bending Schedule (BBS) approach. The BBS method minimises the waste of material so that it only leaves the material in the screw-type iron reinforcement, around 14.79% for iron reinforcement with a diameter of 10 mm and 6.65% for iron reinforcement with a diameter of 16 mm. As well as for plain iron reinforcement, only leave material around 0.01% on mm diameter iron reinforcement. The bar bending schedule method can optimize the remaining material from the remaining length of the iron by reusing it for other iron piece plans where the piece’s dimensions can meet the previous rest.

Keywords:

Bar bending schedule, Leftover material, Stirrup reinforcement, The volume requirement.

References:

[1] Mohamed Saad Bajjou, and Anas Chafi, “Exploring the Critical Waste Factors Affecting Construction Projects,” Engineering, Construction and Architectural Management, vol. 29, no. 6, pp. 2268-2299, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Carlos T. Formoso et al., “Material Waste in Building Industry: Main Causes and Prevention,” Journal of Construction Engineering and Management-ASCE, vol. 128, no. 4, pp. 316-325, 2002.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Wirakaryanti Elsa, “Method of Cutting Iron to Minimize Waste of Material in Working Work,” Thesis, Lambung Mangkurat University, 2017.
[Google Scholar]
[4] B. A. G. Bossink, and H. J. H. Brouwers, “Construction Waste: Quantification and Source Evaluation,” Journal of Construction Engineering and Management, vol. 122, no. 1, pp. 55-60, 1996.
[CrossRef] [Google Scholar] [Publisher Link]
[5] I. Wayan Muka, Made Adi Widyatmika, and I. Made Nova Antara, “Comparison Analysis of Waste Iron Reinforcement Conventional Method with Cutting Optimization Pro Software,” Technical, vol. 15, no. 2, pp. 41-49, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Husen Abrar, Project Management: Planning, Scheduling, and Project Control, Yogyakarta Andi, 2011.
[Google Scholar] [Publisher Link]
[7] Mulyadi, Akutansi Biaya, Yogyakarta, Aditya Media, 2000.
[8] Donald R. Askeland, and Wendelin J. Wright, Essentials of Materials Science and Engineering, Cengage Learning, 2018.
[Google Scholar] [Publisher Link]
[9] K. V. Subrahmanyam, U. Arun Kumar, and P. V. V. Satyanarayana, “A Comparative Study on Utilization of Waste Materials in GSB Layer,” SSRG International Journal of Civil Engineering, vol. 1, no. 3, pp. 9-13, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[10] National Standard, “Concrete Reinforcing Steel,” National Standardization Agency, Indonesia, 2017. [Online]. Available: http://www.haniljayasteel.com/img/SNI_2052-2002-2017.pdf
[11] Gatot Setya Budi, “Testing of Tensile Strength and Modulus of Elasticity of Steel Reinforcement (Study of Steel Reinforcement with A Bent Angle of 45?, 90?, 135?),” Journal of Civil Engineering, vol. 11, no. 1, pp. 1-12, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Christian Eko Wior, Steenie E. Wallah, and Ronny Pandalek, “Study of the Compressive Strength of Concrete and Tensile Strength of Reinforcing Steel in the Building of Architectural and Electrical Engineering at the University of Sam Ratulangi Manado after the Fire,” Journal of Civil Statistics, vol. 3, no. 4, pp. 1-9, 2015.
[Google Scholar] [Publisher Link]
[13] Julsena Julsena, Abdullah Abdullah, and Anita Rauzana, “Residual Material Factors Affecting Costs in the Implementation of Building Construction Projects in Aceh Province,” Journal of Civil Engineering Archives and Planning, vol. 1, no. 4, pp. 148-155, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Al-moghany, and Said Saker, “Managing and Minimizing Construction Waste in Gaza Strip,” Thesis, The Islamic University of Gaza, Palestina, 2006.
[Google Scholar]
[15] Eyad Haddad, “Construction Resources Management System for Gaza Strip Building Contractors,” Civil and Environmental Research, vol. 7, no. 5, pp. 27-35, 2015.
[Google Scholar] [Publisher Link]
[16] Ghaleb J. Sweis et al., “Understanding the Causes of Material Wastage in the Construction Industry,” Jordan Journal of Civil Engineering, vol. 15, no. 2, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Ghaleb J. Sweis et al., “Material Wastage on Construction Sites in the Gaza Strip,” International Journal of Construction Project Management, vol. 3, no. 2, pp. 107-125, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Deepak Karoriya, and Mukesh Pandey, “Efficient Techniques of Construction Material Management in Construction Projects,” International Research Journal of Engineering and Technology (IRJET), vol. 5, no. 3, pp. 1136-1138, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Rasha H. Ali, “New Innovation in Concrete using Industrial and Agricultural Wastes,” SSRG International Journal of Civil Engineering, vol. 9, no. 5, pp. 1-5, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Nilesh Jain, Avinash Shingan, and Shantanu Paraspatki, “Construction Waste Minimisation & Management,” SSRG International Journal of Civil Engineering, vol. 3, no. 12, pp. 22-28, 2016.
[CrossRef] [Publisher Link]
[21] Andri Budiadi, “Practical Design of Prestressed Concrete,” Yogyakarta, Andi (2008).
[Google Scholar]
[22] A. A. Gulghane, and P. V. Khandve, “Management for Construction Materials and Control of Construction Waste in the Construction Industry: A Review,” International Journal of Engineering Research and Applications, vol. 5, no. 4, pp. 59-64, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Widi Hartono, Hartanty Utami, and Sunarmasto Sunarmasto, “Program Design of Bar Bending Schedule Reinforcement of Pile Cap and Bottom Column using Visual Basic 6.0,” Civil Engineering Matrix, vol. 3, no. 2, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Widia Ade Novita, Yuni Ulfiiyati, and Siska Aprilia Hardiyanti, “Optimization of Iron Waste at the Median Pier of the Jakarta – Cikampek 2 Elevated Toll Road with a Linear Program,” Journal of Civil and Environmental Engineering, vol. 5, no. 1, pp. 58-66, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Candra Yuliana, Gawit Hidayat, and Jihan Safitri, “Analysis of Waste Material on Reinforced Concrete Work in Wetlands by Linear Programming Method,” SSRG International Journal of Civil Engineering, vol. 9, no. 9, pp. 33-38, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[26] MAN Kork, Widi Hartono, and Sugiyarto Sugiyarto, “Calculation of the Need for Iron Reinforcement by Taking into Account the Optimization of Iron Waste in Beam Work with the Microsoft Excel Program,” Civil Engineering Matrix, vol. 1, no. 3, pp. 290-295, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[27] K. Agyekum, J. Ayarkwa, and T. Adjei-Kumi, “Minimizing Materials Wastage in Construction - A Lean Construction Approach,” Journal of Engineering and Applied Science, vol. 5, no. 1, pp. 125-146, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Ezhilarasi S, and S. Chandran, “Onsite Treatment of Urban Waste Water using Eco Bio-Blocks,” International Journal of Recent Engineering Science, vol. 5, no. 4, pp. 19-22, 2018.
[CrossRef] [Publisher Link]
[29] Chi Sun Poon et al., “Management of Construction Waste in Public Housing Projects in Hong Kong,” Construction Management & Economics, vol. 22, no. 7, pp. 675-689, 2004.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Chundakus Habsya et al., “Study of Characteristic Physical and Mechanic of Foamed Lightweight Concrete with Fly Ash Added for Wall Materials,” International Journal of Recent Engineering Science, vol. 5, no. 1, pp. 26-31, 2018.
[Google Scholar] [Publisher Link]
[31] Ann T. W. Yu et al., “Strategies for Effective Waste Reduction and Management of Building Construction Projects in Highly Urbanized Cities - A Case Study of Hong Kong,” Buildings, vol. 11, no. 5, pp. 1-14, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[32] Ebikapade Amasuomo, and Jim Baird, “The Concept of Waste and Waste Management,” Journal of Management and Sustainability, vol. 6, no. 4, p. 88, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[33] Jeffrey K. Seadon, “Sustainable Waste Management Systems,” Journal of Cleaner Production, vol. 18, no. 16-17, pp. 1639-1651, 2010.
[CrossRef] [Google Scholar] [Publisher Link]