Seismic Performance of 3D-Printed Concrete Structures: A Comprehensive Review of Material Behaviour, Geometry, and Optimization

International Journal of Civil Engineering

© 2026 by SSRG - IJCE Journal

Volume 13 Issue 1

Year of Publication : 2026

Authors : Parveen Berwal, Ahmed A. Alamiery, Aseel Smerat, Mukhtar Hamid Abed, Ali Majdi

10.14445/23488352/IJCE-V13I1P107

How to Cite?

Parveen Berwal, Ahmed A. Alamiery, Aseel Smerat, Mukhtar Hamid Abed, Ali Majdi, "Seismic Performance of 3D-Printed Concrete Structures: A Comprehensive Review of Material Behaviour, Geometry, and Optimization," SSRG International Journal of Civil Engineering, vol. 13,  no. 1, pp. 76-92, 2026. Crossref, https://doi.org/10.14445/23488352/IJCE-V13I1P107

Abstract:

The convergence of additive manufacturing and earthquake engineering is rapidly redefining the design and construction of resilient infrastructure. This review presents a comprehensive synthesis of the current state of knowledge on the seismic performance of 3D-Printed Concrete (3DPC) structures, with a particular emphasis on the role of shape optimization. 3DPC introduces unique opportunities for geometric freedom, material efficiency, and construction automation, but also poses critical challenges related to anisotropy, interlayer bonding, and reinforcement integration under dynamic loading conditions. The review classifies 3DPC structure behaviour in terms of key performance indicators, such as ductility, damping, stiffness, and energy dissipation, to examine experimental results and modelling strategies that can describe the anisotropic and interface-driven behaviour of 3DPC structures. Shape optimization is also investigated as a designing transformational technology development on the basis of computational optimization, using computational techniques, topology optimization, gradient-based approaches, and AI-based structures to operate seismic resilience and reduce material consumption. Optimized walls, shells, and lattice columns case studies illustrate high returns on the resistance against lateral loads, energy dissipation, and tuning to a frequency. Multiscale modelling and hybrid simulation, as well as machine learning-based optimization, are emerging fields of research recognized to be unique in closing the gap between material behaviour and structural performance. More so, the integration of intelligent materials with embedded sensors makes this technology more likely to be on the path of creating intelligent, adaptive 3DPC systems, which can supervise the status of the system in real time, as seismic events happen to it. Despite its encouraging nature, there are severe issues on the front of the field in the form of the lack of standards in terms of testing procedures, the limited full-scale validation, and the lack of characterization of the reinforcement functionality. This review identifies these deficiencies and offers research directions for future work, aiming to develop a single, scenario-free, performance-based design for 3DPC seismic applications. The final product of this work will assist the basic knowledge base required to advance 3DPC out of the laboratory-based innovation to working seismic infrastructure.

Keywords:

3D-Printed Concrete, Seismic behaviour, Construction, Geometric freedom, Energy dissipation.

References:

[1] R.A. Buswell et al., “Freeform Construction: Mega-Scale Rapid Manufacturing for Construction,” Automation in Construction, vol. 16, no. 2, pp. 224-231, 2007.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Yi Wei Daniel Tay et al., “3D Printing Trends in Building and Construction A Review,” Virtual and Physical Prototyping, vol. 12, no. 3, pp. 261-276, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Nathalie Labonnote et al., “Additive Construction: State-of-the-Art, Challenges and Opportunities,” Automation in Construction, vol. 72, pp. 347-366, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Ali Kazemian et al., “Cementitious Materials for Construction-Scale 3D Printing: Laboratory Testing of Fresh Printing Mixture,” Construction and Building Materials, vol. 145, pp. 639-647, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[5] T.T. Le et al., “Mix Design and Fresh Properties for High-Performance Printing Concrete,” Materials and Structures, vol. 45, no. 8, pp. 1221-1232, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[6] C. Gosselin et al., “Large-Scale 3D Printing of Ultra-High Performance Concrete-A New Processing Route for Architects and Builders,” Materials & Design, vol. 100, pp. 102-109. 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Biranchi Panda, and Ming Jen Tan, “Experimental Study on Mix Proportion and Fresh Properties of Fly Ash based Geopolymer for 3D Concrete Printing,” Ceramics International, vol. 44, no. 9, pp. 10258-10265. 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[8] S. Lim et al., “Developments in Construction-Scale Additive Manufacturing Processes,” Automation in Construction, vol. 21, pp. 262-268, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Shaodan Hou et al., “A Review of 3D Printed Concrete: Performance Requirements, Testing Measurements and Mix Design,” Construction and Building Materials, vol. 273, pp. 1-34, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Xianggang Wang et al., “Specimen Size Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water to Binder Ratios,” Journal of Building Engineering, vol. 97, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Mingxu Chen et al., “Study on the Durability of 3D Printed Calcium Sulphoaluminate Cement-Based Materials Related to Rheology Control,” Journal of Materials Research and Technology, vol. 26, pp. 2481-2494, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Slava Markin, and Viktor Mechtcherine, “Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes using 2D Digital Image Correlation,” Cement and Concrete Composites, vol. 139, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Jianzhuang Xiao et al., “Large-Scale 3D Printing Concrete Technology: Current Status and Future Opportunities,” Cement and Concrete Composites, vol. 122, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Huawei Liu et al., “3D Printed Concrete with Recycled Coarse Aggregate: Freeze-Thaw Resistance Assessment and Damage Mechanisms,” Cement and Concrete Research, vol. 200, 2026.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Jacek Katzer, and Tomasz Szatkiewicz, “Properties of Concrete Elements with 3-D Printed Formworks which Substitute Steel Reinforcement,” Construction and Building Materials, vol. 210, pp. 157-161, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Wenxuan Zhu et al., “Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing,” Construction and Building Materials, vol. 483, 2025.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Yi Wei Daniel Tay, Ye Qian, and Ming Jen Tan, “Printability Region for 3D Concrete Printing using Slump and Slump Flow Test,” Composites Part B: Engineering, vol. 174, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Ming Xia, and Jay Sanjayan, “Method of Formulating Geopolymer for 3D Printing for Construction Applications,” Materials & Design,” vol. 110, pp. 382-390, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Chao Liu et al., “3D Printing Concrete with Recycled Sand: The Influence Mechanism of Extruded Pore Defects on Constitutive Relationship,” Journal of Building Engineering, vol. 68, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Wen Zhou et al., “Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites (3DP-ECC),” Cement and Concrete Composites, vol. 130, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Kequan Yu et al., “3D-Printable Engineered Cementitious Composites (3DP-ECC): Fresh and Hardened Properties,” Cement and Concrete Research, vol. 143, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Chao Liu et al., “Seismic Performance of 3D Printed Reinforced Concrete Walls: Experimental Study and Numerical Simulation,” Engineering Structures, vol. 333, 2025.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Natt Makul, “Advanced Smart Concrete - A Review of Current Progress, Benefits and Challenges,” Journal of Cleaner Production, vol. 274, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Siyu Liu et al., “A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes,” Chemosphere, vol. 298, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Steven J. Schuldt et al., “A Systematic Review and Analysis of the Viability of 3D-Printed Construction in Remote Environments,” Automation in Construction, vol. 125, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Dirk Lowke et al., “Particle-Bed 3D Printing in Concrete Construction - Possibilities and Challenges,” Cement and Concrete Research, vol. 112, pp. 50-65, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[27] N. Shahrubudin, T.C. Lee, and R. Ramlan, “An Overview on 3D Printing Technology: Technological, Materials, and Applications,” Procedia Manufacturing, vol. 35, pp. 286-1296, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Vera Voney et al., “From Casting to 3D Printing Geopolymers: A Proof of Concept,” Cement and Concrete Research, vol. 143, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[29] Habibelrahman Hassan et al., “Towards Innovative and Sustainable Buildings: A Comprehensive Review of 3D Printing In Construction,” Automation in Construction, vol. 163, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Shuyi Huang, Weiguo Xu, and Yuqian Li, “The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms,” Frontiers of Architectural Research, vol. 11, no. 4, pp. 653-669, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[31] Viktor Mechtcherine et al., “Large-Scale Digital Concrete Construction - CONPrint3D Concept for On-Site, Monolithic 3D-Printing,” Automation in Construction, vol. 107, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[32] V. Mechtcherineet al., “Extrusion-Based Additive Manufacturing with Cement-Based Materials-Production Steps, Processes, and their Underlying Physics: A Review,” Cement and Concrete Research, vol. 132, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[33] Egor Secrieru et al., “Study on Concrete Pumpability Combining Different Laboratory Tools and Linkage to Rheology,” Construction and Building Materials, vol. 144, pp. 451-461, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[34] Dawei Liu et al., “3D Printing Concrete Structures: State of the Art, Challenges, and Opportunities,” Construction and Building Materials, vol. 405, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[35] Zhe Chen et al., “An Anisotropic Constitutive Model for 3D Printed Hydrogel-Fiber Composites,” Journal of the Mechanics and Physics of Solids, vol. 156, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[36] S. Pessoa et al., “3D Printing in the Construction Industry - A Systematic Review of the Thermal Performance in Buildings,” Renewable and Sustainable Energy Reviews, vol. 141, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[37] Qiang Wang et al., “Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams,” Engineering Structures, vol. 332, 2025.
[CrossRef] [Google Scholar] [Publisher Link]
[38] Hongyu Zhao et al., “Review on Solid Wastes Incorporated Cementitious Material using 3D Concrete Printing Technology,” Case Studies in Construction Materials, vol. 21, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[39] Meruyert Sovetova, and John Kaiser Calautit, “Thermal and Energy Efficiency in 3D-Printed Buildings: Review of Geometric Design, Materials and Printing Processes,” Energy and Buildings, vol. 323, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[40] Shoukat Alim Khan, Muammer Koç, and Sami G. Al-Ghamdi, “Sustainability Assessment, Potentials and Challenges of 3D Printed Concrete Structures: A Systematic Review for Built Environmental Applications,” Journal of Cleaner Production, vol. 303, pp. 1-14, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[41] Mehmet Sakin, and Yusuf Caner Kiroglu, “3D Printing of Buildings: Construction of the Sustainable Houses of the Future by BIM,” Energy Procedia, vol. 134, pp. 702-711, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[42] Hashem Alhumayani et al., “Environmental Assessment of Large-Scale 3D Printing in Construction: A Comparative Study between Cob and Concrete,” Journal of Cleaner Production, vol. 270, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[43] Zuanfeng Pan et al., “Compressive Behavior of 3D Printed Concrete with Different Printing Paths and Concrete Ages,” Case Studies in Construction Materials, vol. 18, no. 14, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[44] Bing Liu et al., “Study on Anisotropy of 3D Printing PVA Fiber Reinforced Concrete using Destructive and Non-Destructive Testing Methods,” Case Studies in Construction Materials, vol. 17, pp. 1-16, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[45] Rosanna Napolitano et al., “Dynamic Characterization of the Layer-Interface Properties of 3D-Printed Concrete Elements,” Case Studies in Construction Materials, vol. 15, pp. 1-17, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[46] Lei Ma et al., “Effect of Drying Environment on Mechanical Properties, Internal RH and Pore Structure of 3D Printed Concrete,” Construction and Building Materials, vol. 315, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[47] Guowei Ma et al., “A Novel Additive Mortar Leveraging Internal Curing for Enhancing Interlayer Bonding of Cementitious Composite for 3D Printing,” Construction and Building Materials, vol. 244, pp. 1-14, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[48] Jingchuan Zhang et al., “A Review of the Current Progress and Application of 3D Printed Concrete,” Composites Part A: Applied Science and Manufacturing, vol. 125, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[49] Jonny Nilimaa, “Smart Materials and Technologies for Sustainable Concrete Construction,” Developments in the Built Environment, vol. 15, pp. 1-19, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[50] Geert De Schutter et al., “Vision of 3D Printing with Concrete-Technical, Economic and Environmental Potentials,” Cement and Concrete Research, vol. 112, pp. 25-36, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[51] R.J.M. Wolfs, F.P. Bos, and T.A.M. Salet, “Hardened Properties of 3D Printed Concrete: The Influence of Process Parameters on Interlayer Adhesion,” Cement and Concrete Research, vol. 119, pp. 132-140, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[52] Adeyemi Adesina, “Sustainable Application of Cenospheres in Cementitious Materials - Overview of Performance,” Developments in the Built Environment, vol. 4, pp. 1-15, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[53] Junbo Sun et al., “Fibre-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing,” Ceramics International, vol. 47, no. 19, pp. 27107-27121, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[54] Yidong Chen et al., “Extrusion-Based 3D Printing Concrete with Coarse Aggregate: Printability and Direction-Dependent Mechanical Performance,” Construction and Building Materials, vol. 296, 2021.
[CrossRef] [Google Scholar] [Publisher Link]