Study of 1x4 Optical Power Splitters with Optical Network
|International Journal of Electronics and Communication Engineering|
|© 2014 by SSRG - IJECE Journal|
|Volume 1 Issue 4|
|Year of Publication : 2014|
|Authors : Miss. Gayatri Y. Gurav , Prof. Maruti B. Limkar and Prof. Sanjay M. Hundiwale|
How to Cite?
Miss. Gayatri Y. Gurav , Prof. Maruti B. Limkar and Prof. Sanjay M. Hundiwale, "Study of 1x4 Optical Power Splitters with Optical Network," SSRG International Journal of Electronics and Communication Engineering, vol. 1, no. 4, pp. 15-19, 2014. Crossref, https://doi.org/10.14445/23488549/IJECE-V1I4P103
The optical Power splitters which allow for fiber connections are based on Different design techniques and fabrication process. The 1x4 optical power splitters have four output channels which are suitable for a number of network architectures by better adaptation to existing constructions like fiber cables and fiber management systems. The 4- level splitter can be used for cascading in the distributed network. The splitter cascade distributes the optical signal from one fiber to 16 subscribers via 4 splitting points in different locations but with equal signal levels for all 16 subscribers. This paper is aimed to provide reviews on different design techniques and fabrication process required while designing 1X4 optical power splitter.
Design Techniques, Fabrication Process, Network, Optical Splitter, Power Splitter
 Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication Ma Huilian, Yang Jianyi, Zhou Qiang,Wang Minghua. Communications, 1999,APCC/OECC 99, Fifth Asia-Pacific Conference
 Giga-bit Transmission over Multimode Air-Clad Holey Fiber in a 1X4 PON Configuration Y. Kim, D. U. Kim, Y. Jeong, T. –Y. Kim, C. -S. Park and K. Oh Department of Information and Communications, GIST, Korea,2006 IEEE
 Coupling Characteristics of Multicore Photonic Crystal Fiber-Based 1 4 Power Splitters Shailendra K. Varshney, journal of light wave technology, Vol. 27, No. 12, june 15,2009
 K. Saitoh, Y. Sato, and M. Koshiba, “Coupling characteristics of dual core photonic crystal fiber couplers,” Opt. Express, vol. 11, no. 24, pp. 3188–3195, Dec. 2003
 Design and Modeling of Symmetric Three Branch Polymer Planar Optical Power Dividers Václav PRAJZLER 1, Hynek TŮMA 1, Jarmila ŠPIRKOVÁ 2, Vítězslav JEŘÁBEK 1 Dept.
of Microelectronics, Radio engineering, Vol. 22, No.1 April 2013