Analysis of Mechanical Losses in a Squirrel-Cage Induction Motor Induced by Different Types of Eccentricity

International Journal of Electrical and Electronics Engineering

© 2025 by SSRG - IJEEE Journal

Volume 12 Issue 5

Year of Publication : 2025

Authors : Payal Suthar, Ketan Badgujar

10.14445/23488379/IJEEE-V12I5P123

How to Cite?

Payal Suthar, Ketan Badgujar, "Analysis of Mechanical Losses in a Squirrel-Cage Induction Motor Induced by Different Types of Eccentricity," SSRG International Journal of Electrical and Electronics Engineering, vol. 12,  no. 5, pp. 278-286, 2025. Crossref, https://doi.org/10.14445/23488379/IJEEE-V12I5P123

Abstract:

Rotor eccentricity in electric machines, caused by manufacturing tolerances and rotor aging, is an inherent and unavoidable phenomenon. This eccentricity disturbs the symmetrical distribution of the magnetic field, leading to an Unbalanced Magnetic Pull (UMP) and increased bearing friction losses. This study investigates the impact of static, dynamic, and mixed types of rotor eccentricities on the mechanical losses in squirrel-cage rotor induction motors under no-load conditions. The airgap flux density was first calculated using the Magnetomotive Force (MMF) permeance method, considering multiple armature reactions. The UMP caused by the eccentricity was then determined using the Maxwell stress tensor method. The analytical results for the UMP were employed to estimate the mechanical losses, which were subsequently validated through experimental measurements. The results clearly demonstrate that the presence of rotor eccentricity substantially increases the mechanical loss component in motors, directly impacting no-load losses and consequently reducing operational efficiency. The findings underscore the critical influence of rotor eccentricity in degrading motor performance through increased friction and vibration. This study provides essential guidance for optimizing induction motor design, monitoring and maintenance to enhance reliability and efficiency and mitigate losses.

Keywords:

Unbalanced magnetic pull, Armature reaction, Eccentricity, Airgap flux density, Ansys Maxwell, Mechanical loss.

References:

[1] S. Nandi, H.A. Toliyat, and X. Li, “Condition Monitoring and Fault Diagnosis of Electrical Motors - A Review,” IEEE Transactions on Energy Conversion, vol. 20, no. 4, pp. 719-729, 2005.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Alberto Bellini et al., “Advances in Diagnostic Techniques for Induction Machines,” IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4109-4126, 2008.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Hanifi Guldemir, “Detection of Airgap Eccentricity Using Line Current Spectrum of Induction Motors,” Electric Power Systems Research, vol. 64, no. 2, pp. 109-117, 2003.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Xiaodong Li, Qing Wu, and Subhasis Nandi, “Performance Analysis of a Three-Phase Induction Machine with Inclined Static Eccentricity,” IEEE Transactions on Industry Applications, vol. 43, no. 2, pp. 531-541, 2007.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Jawad Faiz, Iman Tabatabaei, and E. Sharifi-Ghazvini, “A Precise Electromagnetic Modeling and Performance Analysis of a Three Phase Squirrel-Cage Induction Motor under Mixed Eccentricity Condition,” Electromagnetics, vol. 24, no. 6, pp. 471-489, 2004.
[CrossRef] [Google Scholar] [Publisher Link]
[6] A.K. Sawhney, and A. Chakrabarti, “Electrical Machine Design, DhanpatRai and Co, pp. 140-230, 2006.
[Google Scholar]
[7] Andrej Burakov, Modelling the Unbalanced Magnetic Pull in Eccentric-Rotor Electrical Machines with Parallel Windings,” Helsinki University of Technology, Espoo, Finland, pp. 1-72, 2007.
[Google Scholar] [Publisher Link]
[8] Haoyu Kang et al., “Analysis of Influence of Rotor Eccentricity in Double Fed Induction Machine,” 2023 6th International Conference on Power and Energy Applications, Weihai, China, pp. 38-43, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Haiyang Li et al., “A Numerical Study of Rotor Eccentricity and Dynamic Load in Induction Machines for Motor Current Analysis Based Diagnostics,” Maintenance, Reliability and Condition Monitoring, vol. 1, no. 2, pp. 71-86, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Jan Sobra et al., “Analysis of Rotor’s Eccentricity Influence on Bearing Load of Induction Machine,” Proceedings of the 16th International Conference on Mechatronics, Mechatronika 2014, Brno, Czech Republic, pp. 71-78, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Ranjan Sasti Charan Pal, and Amiya Ranjan Mohanty, “A Simplified Dynamical Model of Mixed Eccentricity Fault in a Three-Phase Induction Motor,” IEEE Transactions on Industrial Electronics, vol. 68, no. 5, pp. 4341-4350, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[12] H. Chuan, and L. Gan, “Investigation of the Power Losses in Induction Machines with Rotor Eccentricity,” Electrical Engineering, vol. 102, no. 3, pp. 1393-1403, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Bruno Baptista et al., “Temperature Distribution Inside a Three-Phase Induction Motor Running with Eccentric Airgap,” Przeglad Elektrotechniczny, vol. 88, no. 1A, pp. 96-99, 2012.
[Google Scholar] [Publisher Link]
[14] Shahab Khalghani, “Analytical Loss Calculation Tool for an Induction Motor,” Diploma Thesis, Lappeenranta-Lahti University of Technology LUT, pp. 1-50, 2020.
[Google Scholar] [Publisher Link]
[15] Ogbonnaya I. Okoro et al., “Performance Comparison of Static Eccentricity Between Squirrel-Cage Induction and Wound-Field Flux Switching Machines,” International Conference on Electrical Machines, Torino, Italy, pp. 1-6, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Jawad Faiz et al., “Finite-Element Transient Analysis of Induction Motors Under Mixed Eccentricity Fault,” IEEE Transactions on Magnetics, vol. 44, no. 1, pp. 66-74, 2008.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Mansour Ojaghi, and Samaneh Nasiri, “Modeling Eccentric Squirrel-Cage Induction Motors with Slotting Effect and Saturable Teeth Reluctances,” IEEE Transactions on Energy Conversion, vol. 29, no. 3, pp. 619-627, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Xiaowen Li et al., “Angular-Based Modeling of Unbalanced Magnetic Pull for Analyzing the Dynamical Behavior of a 3-Phase Induction Motor,” Journal of Sound and Vibration, vol. 494, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[19] “112-2017 - IEEE Standard Test Procedure for Polyphase Induction Motors and Generators,” IEEE Standards, pp. 1-115, 2018.
[CrossRef] [Publisher Link]
[20] Ali Rezig et al., “Effect of Rotor Eccentricity Faults on Noise Generation in Permanent Magnet Synchronous Motors,” Progress in Electromagnetics Research C, vol. 15, pp. 117-132, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Anil Balan, “Determination of Radial Electromagnetic Forces in Squirrel-Cage Induction Motors,” M.Sc Thesis, University of Saskatchewan, pp. 1-184, 1990.
[Google Scholar]
[22] T.A. Sarikaya, A. Polat, and L.T. Ergene, “Diagnosis of Different Eccentricity Faults in Induction Motors Based on Electrical and Magnetic Signatures and Unbalanced Magnetic Pull,” Proceedings 2019 International Aegean Conference on Electrical Machines and Power Electronics, ACEMP 2019 and 2019 International Conference on Optimization of Electrical and Electronic Equipment, Istanbul, Turkey, pp. 186-190, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Carlo Concari, Giovanni Franceschini, and Carla Tassoni, “Towards Practical Quantification of Induction Drives Mixed Eccentricity,” IEEE Transactions on Industry Applications, vol. 47, no. 3, pp. 1232-1239, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Vladimir Kindl et al., “Review of Time and Space Harmonics in Multi-Phase Induction Machine,” Energies, vol. 13, no. 2, pp. 1-17, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Mattias Wallin, “Measurement and Modelling of Unbalanced Magnetic Pull in Hydropower Generators,” PhD Thesis, University of Uppsala, pp. 1-62, 2013.
[Google Scholar] [Publisher Link]