Ackermann’s Formula in Global Fuzzy Synergetic Power System Stabilizer
| International Journal of Electrical and Electronics Engineering |
| © 2026 by SSRG - IJEEE Journal |
| Volume 13 Issue 2 |
| Year of Publication : 2026 |
| Authors : Emira NECHADI |
How to Cite?
Emira NECHADI, "Ackermann’s Formula in Global Fuzzy Synergetic Power System Stabilizer," SSRG International Journal of Electrical and Electronics Engineering, vol. 13, no. 2, pp. 153-159, 2026. Crossref, https://doi.org/10.14445/23488379/IJEEE-V13I2P112
Abstract:
Small-signal stability remains a crucial research area in power engineering. Oscillations arise in synchronous machines when small disturbances create an imbalance between mechanical and electrical torques. If adequate damping is not provided, these oscillations degrade the quality, continuity, and stability of power system operation. Conventional power systems commonly employ Power System Stabilizers (PSSs) to mitigate such oscillations. This work proposes a novel global fuzzy synergetic power system stabilizer based on Ackermann’s formula. The design procedure consists of three main steps. First, a synergetic control approach is applied to develop operating-point-specific models for individual power subsystems. Second, Ackermann’s formula is used to compute the macro-variable gain for each subsystem within the synergetic framework. Third, a fuzzy technique is employed to integrate all subsystem models and their corresponding macro-variable gains into a global model for the synchronous machine power system. System stability is guaranteed using Lyapunov’s second theorem. The effectiveness of the proposed method is evaluated through simulation studies under severe operating conditions of a single-machine power system model. Results demonstrate that the global fuzzy synergetic stabilizer provides superior damping performance compared to both the conventional PSS and the synergetic control approach.
Keywords:
Ackermann’s Formula, Global Fuzzy Synergetic Control, Power System Stabilizer (PSS), Single Machine Infinite Bus (SMIB), Lyapunov Stability.
References:
[1] Prabha S. Kundur, Power System Stability, 3rd ed, Power System Stability and Control, CRC Press, vol. 10, no. 1, pp. 7-1, 2007.
[Google Scholar] [Publisher Link]
[2] Davide Lauria et al., “Power Systems Stabilizers Online Tuning based Upon Parameters Dynamic Estimation,” Sustainable Energy, Grids and Networks, vol. 39, pp. 1-14, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Ramesh Devarapalli et al., “Amended GWO Approach based Multi-Machine Power System Stability Enhancement,” ISA Transactions, vol. 109, pp. 152-174, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Samira Boumous et al., “New Approach to Power System Stabilizer Optimization Techniques,” Diagnostyka, vol. 25, no. 4, pp. 1-8, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[5] R. Nafeena Abdul Munaf et al., “Optimal Design of Power System Stabilizer and Thyristor Controlled Series Compensator-based Controllers using Genetic Algorithm,” International Journal of Intelligent Systems and Applications in Engineering, vol. 12, no. 3, pp. 3505-3514, 2024.
[Publisher Link]
[6] G. Shahgholian, and A. Fattollahi, “Improving Power System Stability using Transfer Function: A Comparative Analysis,” Engineering Technology Applied Science Research, vol. 7, no. 5, pp. 1946-1952, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[7] A. Sheykhsarraf, Moein Abedini, and Mahdi Davarpanah, “A Novel Method for Optimal Placement and Tuning of the Power System Stabilizer in the Multi-Machine System,” Electric Power Systems Research, vol. 221, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[8] A.Y. Sivaramakrlshnan, M.V. Hariharan, and M.C. Srisailam, “Design of a Variable-Structure Load Controller using Pole Assignment Technique,” International Journal of Control, vol. 40, no. 3, pp. 487-498, 1984.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Shi-Jie Cheng et al., “An Adaptive Synchronous Machine Stabilizer,” IEEE Transactions on Power Systems, vol. 1, no. 3, pp. 101-107, 1986.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Dipak R. Swain et al., “Stability Assessment using Adaptive Interval Type-2 Fuzzy Sliding Mode Controlled Power System Stabilizer,” Soft Computing, vol. 27, no. 12, pp. 7715-7737, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Arman Fathollahi, Abbas Kargar, and Sayed Yaser Derakhshandeh, “Enhancement of Power System Transient Stability and Voltage Regulation Performance with Decentralized Synergetic TCSC Controller,” International Journal of Electrical Power and Energy Systems, vol. 135, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Emira Nechadi et al., “Adaptive Fuzzy Sliding Mode Power System Stabilizer using Nussbaum Gain,” International Journal of Automation and Computing, vol. 10, no. 4, pp. 281-287, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[13] E.S. Ali, “Optimization of Power System Stabilizers using BAT Search Algorithm,” International Journal of Electrical Power and Energy Systems, vol. 61, pp. 683-690, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Martin Ernek et al., “Robust Power System Stabilizer Tuning using Genetic Algorithm,” Journal of Electrical Engineering, vol. 76, no. 3, pp. 232-240, 2025.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Sreedivya Kondattu Mony, Aruna Jeyanthy Peter, and Devaraj Durairaj, “Gaussian Quantum Particle Swarm Optimization-based Wide-Area Power System Stabilizer for Damping Inter-Area Oscillations,” World Journal of Engineering, vol. 20, no. 2, pp. 325-336, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Shaimaa Shukri Abd. Alhalim et al., “A Neural Controller Design for Enhancing Stability of a Single Machine Infinite Bus Power System,” Engineering Technology Applied Science Research, vol. 14, no. 6, pp. 18459-18468, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[17] G. Feng, “A Survey on Analysis and Design of Model-based Fuzzy Control Systems,” IEEE Transactions on Fuzzy Systems, vol. 14, no. 5, pp. 676-697, 2006.
[CrossRef] [Google Scholar] [Publisher Link]
[18] J. Ackerman, and V. Utkin, “Sliding Mode Control Design based on Ackerman’s Formula,” IEEE Transactions on Automatic Control, vol. 43, no. 2, pp. 234-237, 1998.
[CrossRef] [Google Scholar] [Publisher Link]

10.14445/23488379/IJEEE-V13I2P112