Load Balancing of The Electric Drive System Using Two Rigid Shaft Motors with Adaptive Fuzzy Controller
|International Journal of Electrical and Electronics Engineering|
|© 2019 by SSRG - IJEEE Journal|
|Volume 6 Issue 6|
|Year of Publication : 2019|
|Authors : Dang Danh Hoang, Tran Xuan Minh|
How to Cite?
Dang Danh Hoang, Tran Xuan Minh, "Load Balancing of The Electric Drive System Using Two Rigid Shaft Motors with Adaptive Fuzzy Controller," SSRG International Journal of Electrical and Electronics Engineering, vol. 6, no. 6, pp. 1-6, 2019. Crossref, https://doi.org/10.14445/23488379/IJEEE-V6I6P101
The electric drive systems using high-power motors to meet the requirements of the load often have many difficulties both economically and technically. The high-power motor has a high manufacturing cost and requires the need for a high power transform device (controlled rectifier for DC motor, inverter for AC motor). Therefore, the solution using electric drive system using two rigid shaft motors to reduce the capacity of each motor is very needed. This paper introduces the method to design an adaptive fuzzy controller that is able to keep the load blancing, this model is the motors of the electric drive system using two rigid shaft motors to ensure control quality when speed, load and parameters of motors are changed.
Motor; PID; Fuzzy; Adaptive Fuzzy; Load Balancing.
 Nguyen Duy Cuong (2014), Ministry-level Science and Technology topic: "Balancing load for two parallel rigrid coupling motors".
 Lai Khac Lai (2003), “Some methods of synthesizing controllers based on of fuzzy logic and adaptation”, Technical doctoral thesis, Hanoi University of Technology.
 Phan Xuan Minh and Nguyen Doan Phuoc (2002), “Fuzzy logic control 3rd printing with additional”, Science and Technology Publishing.
 Nguyen Doan Phuoc (2012), “Analyze and Control of Nonlinear system”, Bach Khoa Publishing.
 Nguyen Doan Phuoc (2002), “Nonlinear control theory”, Hanoi University of Science and Technology.
 Nguyen Phung Quang (2006), “Matlab Simulink”, Science and Technology Publishing, Hanoi.
 Vu Gia Hanh, Tran Khanh Ha, Phan Tu Thu (1998), “Electrical Machine T1”, Science and Technology Publishing
 Bui Quoc Khaánh, Nguyen Van Lien, Nguyen Thi Hien (2008), “ Electrical Transmission”, Science and Technology Publishing
 Vo Minh Chinh, Nguyen Quoc Hai, Tran Trong Minh, “Power Electronics”, Science and Technology Publishing
 Astrom K.J. (1994), Wittenmark B., “Adaptive Control”, Prentice Hall.
 Job van Amerongen (2004), “Inteligent Control, Part 1: Model Reference Adaptive Control”, University of Twente.