An Investigation of the Effect of Process Parameters in Turning Operation on Cast Iron

International Journal of Mechanical Engineering

© 2016 by SSRG - IJME Journal

Volume 3 Issue 2

Year of Publication : 2016

Authors : M.Dhanenthiran

10.14445/23488360/IJME-V3I2P102

How to Cite?

M.Dhanenthiran, "An Investigation of the Effect of Process Parameters in Turning Operation on Cast Iron," SSRG International Journal of Mechanical Engineering, vol. 3,  no. 2, pp. 6-9, 2016. Crossref, https://doi.org/10.14445/23488360/IJME-V3I2P102

Abstract:

Every industry will expect the quality and time consumption for each and every product. In this work, we have investigated the effect of the process parameters in turning operation on cast iron using titanium carbide (insert). We have analyzed the results based on the factors like surface roughness, machining time, metal removal rate, tool wear. We conducted the various test in the cast iron by varying the speed, depth of cut, feed. Each and every reading are calculated and analyzed. From this investigation, we have analyzed that quality will be improved by maximum spindle speed, maximum depth of cut and the feed. From the result, we found that the quality will be achieved high on cast iron using titanium carbide insert. Based on this project, we can conclude that machining of cast iron using titanium carbide insert combination gives better results than the other materials. The above work was designed by using L18 orthogonal array and 18 experiments were carried out by this process. The mathematical model, ANOVA and graphs are drawn by using the DESIGN EXPERTS SOFTWARE.

Keywords:

Time consumption, Surface roughness, MRR ANOVA, DESIGN EXPERT SOFTWARE

References:

[1] Tagrul Ozel – Tsu-Kong Hsu , Erd Zeren “ Effects Of Cutting Edge Geomentry Workpiece Hardness, Federate And Cutting Speed On Surface Roughness And Forces In Finish Turning Of Hardered Aisi H13 Steel”, International Journal Of Advanced Manufacturing Technology” 25, 2005.
[2] M.Aruna , Dr V. Dhanalakshmi , S. Mohan “Wear Analysis Of Ceramic Cutting Tool Finish Turning Of Inconel 718”, International Journal Of Advanced Manufacturing Technology” volume 2(9),2010
[3] E.D Derakhshan , A.A Akbari “ Experimental Investigation On The Effect Of Workpiece Hardness And Cutting Speed On Surface Roughness In Hard Turning With Cbn Tools”, Proceeding Of The World Congress On Engineering Volume(2) 2009.
[4] M.Kaladhar ,K. venkata subbaiah , C.H srinivasa rao and K.narayana rao “ Optimization Of Process Parameters In Turning At Aisi 202 Austentic Stainless Steel” APRN Journal At Engineering And Applied Sciences Volume(5) 2010.
[5] M.V.R.D Prasad , G.Ranga janardhana and D. Hanumatha rao “ Experimental Investigation To Study The Influence Of Process Parameters In Dry Machining” APRN Journal Of Engineering And Applied Sciences Volume(4) 2009
[6] Adeel H Suhail N Ismail A.V Wong And N.A Abdul Jail “Optimization Of Cutting Parameters Based On Surface Roughness And Assistance Of Work piece Surface Temperature In Turning Process” American journal of engineering and applied sciences 2010
[7] S.Renganathan T.Senthilnathanand and G.Srram “Mathematical Modeling Of Process Parameters On Hard Turning Of Aisi 326 Ss By WC Inserts” Journal Of Scientific And Industrial Research 2009
[8] S.Tamizhmanii ,B.Bin Omar S.Saparudeen and S.Hasan “Tool Flank Wear Analyses On Martensitic Stainless Steel By Turning” Archives of material science and engineers
[9] S.S Mahapatra ,Amar Patnaik and Prabina Ku Patnaik “Parametric Analysis And Optimization Of Cutting Parameters For Turning Operation Based On Taguchi Method” Proceeding of the International Conference On Global Manufacturing And Innovation 2006
[10] Farhad Kolahman and Mahdi Abachizadeh “ Optimizing Turning Parameters For Cylindrical Parts Using Simulate Anneling Method” international journal of engineering and applied sciences 6,2010
[11] S.thamizmanii , k.kanarudin , e. A. Rahim. A. Saparudin , s.hassan “ Tool Wear And Surface Roughness In Turning Aisi 8620 Using Coated Ceramic Tool” proceeding of the world congress of engineering volume(2) 2007.
[12] S.Thamizhmanii, S.Saparudin and S. Hasan “Analysis Of Surface Roughness By Turning Process Using Taguchi Method” journal of achievements in materials and manufacturing engineering 20,2007
[13] T.Tamizharasan, T.Selvaraj and A.Noorul Haq “Analysis Of Tool Wear And Surface Finish In Hard Turning” Int J adv manufacturing technology 2006
[14] S.Thamizmanii and S.Hassan “Effect Of Tool Wear And Forces By Turning Process On Hard Aisi 440 C And Scm 440 Materials” int journal of form volume (2) 2009
[15] Ty G. Dawson and Dr. Thomas and R.kurtees “Wear Trends At PCBN Cutting Tool In Hard Turning”