Intelligent Crack Detection in Building Structures using Coupled Ultrasonic Guided Wave and Acoustic Emission Sensing
| International Journal of Civil Engineering |
| © 2026 by SSRG - IJCE Journal |
| Volume 13 Issue 2 |
| Year of Publication : 2026 |
| Authors : Surajit Mohanty, Subhendu Kumar Pani |
10.14445/23488352/IJCE-V13I2P116
How to Cite?
Surajit Mohanty, Subhendu Kumar Pani, "Intelligent Crack Detection in Building Structures using Coupled Ultrasonic Guided Wave and Acoustic Emission Sensing," SSRG International Journal of Civil Engineering, vol. 13, no. 2, pp. 226-246, 2026. Crossref, https://doi.org/10.14445/23488352/IJCE-V13I2P116
Abstract:
Building structural integrity evaluation is important in the long-term safety and resilience of buildings. Visual inspection techniques that have been in place do not have the capability of detecting beneath surface cracks, or cracks that may develop at an early stage, that would compromise the structural performance. This paper introduces a smart crack sensor with a combination of Ultrasonic Guided Wave (UGW) and Acoustic Emission (AE) as a guide to the complicated Structural Health Monitoring (SHM) of building structures. The system proposed is based on the UGW-based wave propagation analysis along with the AE signal monitoring, which will detect, localize, and characterize surface and internal cracks with the highest accuracy. Algorithms of machine learning are used to comprehend complicated acoustic signals and distinguish between crack initiation, crack propagation, and the noise in the environment. It is experimentally verified on reinforced concrete specimens that the coupled UGW-AE methodology is more sensitive and accurate than the uniaxial methodologies. These are possible through the combination of real-time data acquisition, fusion of signals, and smart pattern recognition that allows early detection of damage and provides the ability to monitor the damage continuously. The study will help in the emergence of an intelligent, non-destructive, and scalable SHM system capable of improving structural dependability and maintenance effectiveness in contemporary infrastructure systems.
Keywords:
Ultrasonic Guided Wave (UGW), Acoustic Emission (AE), Crack detection, Structural Health Monitoring (SHM), Machine learning, Non-Destructive Testing (NDT).
References:
[1] Fahim Md Mushfiqur Rahman, and Sourav Banerjee, “Acoustic Emission with Simulation of Simultaneous Ultrasonic Guided Wave Propagation & Crack Propagation,” Ultrasonics, vol. 151, pp. 1-17, 2025.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Jonathan Melchiorre et al., “Acoustic Emission and Artificial Intelligence Procedure for Crack Source Localization,” Sensors, vol. 23, no. 2, pp. 1-25, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Rocco Alaggio et al., “Two-Years Static and Dynamic Monitoring of the Santa Maria Di Collemaggio Basilica,” Construction and Building Materials, vol. 268, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Angelo Aloisio et al., “The Recorded Seismic Response of the Santa Maria Di Collemaggio Basilica to Low-Intensity Earthquakes,” International Journal of Architectural Heritage, vol. 15, no. 1, pp. 229-247, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Francesco Clementi et al., “Structural Health Monitoring of Architectural Heritage: From the Past to the Future Advances,” International Journal of Architectural Heritage, vol. 15, no. 1, pp. 1-4, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[6] M. Di Benedetto et al., “Concrete Half-Joints: Corrosion Damage Analysis with Numerical Simulation,” FIB Symposium Proceedings, pp. 297-304, 2021.
[Google Scholar] [Publisher Link]
[7] Lu Cheng et al., “Acoustic Emission Source Location using Lamb Wave Propagation Simulation and Artificial Neural Network for I-Shaped Steel Girder,” Construction and Building Materials, vol. 273, pp. 1-17, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Gonçalo C. Rodrigues, and Ricardo P. Braga, “Evaluation of NASA POWER Reanalysis Products to Estimate Daily Weather Variables in a Hot Summer Mediterranean Climate,” Agronomy, vol. 11, no. 6, pp. 1-17, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Mohammed Majeed Hameed et al., “Incorporation of Artificial Neural Network with Principal Component Analysis and Cross-Validation Technique to Predict High-Performance Concrete Compressive Strength,” Asian Journal of Civil Engineering, vol. 22, no. 6, pp. 1019-1031, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Marco Martino Rosso et al., “Corrosion Effects on the Capacity and Ductility of Concrete Half-Joint Bridges,” Construction and Building Materials, vol. 360, pp. 1-44, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Marco M. Rosso et al., “Review on Deep Learning in Structural Health Monitoring,” Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability, 1st ed., CRC Press, pp. 309-315, 2022.
[Google Scholar] [Publisher Link]
[12] F. Parisi et al., “Automated Location of Steel Truss Bridge Damage using Machine Learning and Raw Strain Sensor Data,” Automation in Construction, vol. 138, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Sandeep Sony et al., “Vibration-Based Multiclass Damage Detection and Localization using Long Short-Term Memory Networks,” Structures, vol. 35, pp. 436-451, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[14] M. Flah et al., “Localization and Classification of Structural Damage using Deep Learning Single-Channel Signal-based Measurement,” Automation in Construction, vol. 139, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Yang Yu et al., “Vision-Based Concrete Crack Detection using a Hybrid Framework Considering Noise Effect,” Journal of Building Engineering, vol. 61, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Yang Yu et al., “Crack Detection of Concrete Structures using Deep Convolutional Neural Networks Optimized by Enhanced Chicken Swarm Algorithm,” Structural Health Monitoring, vol. 21, no. 5, pp. 2244-2263, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Jonathan Melchiorre et al., Deep Acoustic Emission Detection Trained on Seismic Signals, Applications of Artificial Intelligence and Neural Systems to Data Science, Springer, Singapore, pp. 83-92, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Congcong Guo et al., “High-throughput Estimation of Plant Height and Above-Ground Biomass of Cotton using Digital Image Analysis and Canopeo,” Technologies in Agronomy, vol. 2, no. 1, pp. 1-10, 2022.
[Google Scholar] [Publisher Link]
[19] Marco M. Rosso et al., “Train-Track-Bridge Interaction Analytical Model with Non-proportional Damping: Sensitivity Analysis and Experimental Validation,” European Workshop on Structural Health Monitoring, Palermo, Italy, pp. 223-232, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Marco Martino Rosso et al., “Convolutional Networks and Transformers for Intelligent Road Tunnel Investigations,” Computers and Structures, vol. 275, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Annamaria Mesaros et al., “Sound Event Detection: A Tutorial,” IEEE Signal Processing Magazine, vol. 38, no. 5, pp. 67-83, 2021.
[CrossRef] [Google Scholar] [Publisher Link]