Performance Optimization of Conventional Savonius Rotor for Different Construction Materials through CFD Study

International Journal of Civil Engineering

© 2026 by SSRG - IJCE Journal

Volume 13 Issue 2

Year of Publication : 2026

Authors : Amandeep Singh, Sonu Sharma

10.14445/23488352/IJCE-V13I2P120

How to Cite?

Amandeep Singh, Sonu Sharma, "Performance Optimization of Conventional Savonius Rotor for Different Construction Materials through CFD Study," SSRG International Journal of Civil Engineering, vol. 13,  no. 2, pp. 302-310, 2026. Crossref, https://doi.org/10.14445/23488352/IJCE-V13I2P120

Abstract:

The study concludes the potential for conducting a computational analysis on the conventional design of the Savonius rotor made with Poly-Lactic Acid (PLA), which is a 3-D printer material. This material can be molded into any shape with the 3D printer capabilities. The output from the simulation results thus provides an effective design solution for the purpose of constructing the Sovonius Rotor to be produced by a 3D printing technology. A computer design model thus aids in conducting simulation studies to find the torque and Coefficient of Performance (COP) as the primary performance indicators, followed by structural analysis on the rotor blades as the secondary performance indicator. It is a dual simulation study for the evaluation of torque based on the best design of the rotor, for the production of these designs based on the material selection after structural analysis simulation test, both conducted by ANSYS. The material selection was based on easily available metallic and composite material choices, such as aluminum, steel, and PLA. These materials were tested for their structural deformity under wind velocities of 6 m/s, 8 m/s, and 10 m/s. The COP was found to be maximum at 10 m/s for the configuration of the turbine used. The use of PLA is an affordable 3D printing material for building a small Vertical-Axis Wind Turbine (VAWT). PLA is a light material having low density and thermal conductivity as compared to steel and aluminum (88%), tested for producing stress values of 14 mPa, 156 mPa, and 10638 MPa, respectively, at 10 m/s. Deformation over rotor blades was found to be highest for aluminum (88%) at 1 m, and lowest for steel at 0.015 m. Though steel shows more reliable deformation results, PLA is a more preferred material for complex designs of 3-D printing turbine construction due to the lower material cost than steel.

Keywords:

Horizontal Axis Wind Turbine, Vertical Axis Wind Turbine, Poly-Lactic Acid, Computer Aided Design, Computational Fluid Dynamics, Shear Stress Turbulence Model, Coefficient of Performance.

References:

[1] Abhishek Kumar et al., “An Overview of Wind Energy Development and Policy Initiatives in India,” Clean Technologies and Environmental Policy, vol. 24, no. 5, pp. 1337-1358, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Sonu Sharma, and Rajesh Kumar Sharma, “Performance Improvement of Savonius Rotor using Multiple Quarter Blades-A CFD Investigation,” Energy Conversion and Management, vol. 127, pp. 43-54, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Pinku Debnath, and V. Gandhirajan, “A Comprehensive Review on Design and Development Analysis and Blade Material Selection of Helical Savonius Rotor,” Wind Engineering, vol. 47, no. 4, pp. 883-894, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Anupam Dewan, Adesh Gautam, and Rahul Goyal, “Savonius Wind Turbines: A Review of Recent Advances in Design and Performance Enhancements,” Materialstoday: Proceedings, vol. 47, pp. 2976-2983, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[5] M. Syukri. M. Shamsuddin, Noorfazreena M. Kamaruddin, and Zulfaa Mohamed-Kassim, “The Influence of Material on the Power Performance of Savonius Turbines in Wind and Water Applications,” Ocean Engineering, vol. 266, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Ivo Marinić-Kragić, Damir Vučina, and Zoran Milas, “Robust Optimization of Savonius-Type Wind Turbine Deflector Blades Considering Wind Direction Sensitivity and Production Material Decrease,” Renewable Energy, vol. 192, pp. 150-163, 2022. [CrossRef] [Google Scholar] [Publisher Link]
[7] Muhamad Hasfanizam Mat Yazik et al., “Effect of Surface Roughness and Blade Material on the Performance of a Stationary Savonius Wind Turbine under Different Operating Conditions,” Physics of Fluids, vol. 35, no. 3, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Sobhy M. Ghoneam, Ahmed A. Hamada, and Taha S. Sherif, “Dynamic Analysis of the Optimized Savonius Vertical Axis Wind Turbine Composite Blades,” Journal of Solar Energy Engineering, vol. 143, no. 5, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Petar Škvorc, and Hrvoje Kozmar, “Wind Energy Harnessing on Tall Buildings in Urban Environments,” Renewable and Sustainable Energy Reviews, vol. 152, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Sukanta Roy, and Ujjwal K. Saha, “Review on the Numerical Investigations into the Design and Development of Savonius Wind Rotors,” Renewable and Sustainable Energy Reviews, vol. 24, pp. 73-83, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[11] M.H. Nasef et al., “Evaluation of Savonius Rotor Performance: Static and Dynamic Studies,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 123, pp. 1-11, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Anupam Dewan et al., “Computational Fluid Dynamics and Turbulence Modelling in Various Blades of Savonius Turbines for Wind and Hydro Energy: Progress and Perspectives,” Ocean Engineering, vol. 283, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[13] A.J. Alexander, and B.P. Holownia, “Wind Tunnel Tests on a Savonius Rotor,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 3, no. 4, pp. 343-351, 1978.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Hermann Schlichting, and Klaus Gersten, Boundary-Layer Theory, 9th ed., Springer Berlin, Heidelberg, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[15] P.D. Fleming, and S.D. Probert, “A Proposed, Three-Sail, Savonius-Type Wind-Rotor,” Applied Energy, vol. 12, no. 4, pp. 327-331, 1982.
[CrossRef] [Google Scholar] [Publisher Link]
[16] S.A. Tabassum, and S.D. Probert, “Vertical-Axis Wind Turbine: A Modified Design,” Applied Energy, vol. 28, no. 1, pp. 59-67, 1987.
[CrossRef] [Google Scholar] [Publisher Link]
[17] T. Ogawa, H. Yoshida, and Y. Yokota, “Development of Rotational Speed Control Systems for a Savonius-Type Wind Turbine,” Journal of Fluids Engineering, vol. 111, no. 1, pp. 53-58, 1989.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Nobuyuki Fujisawa, “On the Torque Mechanism of Savonius Rotors,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 40, no. 3, pp. 277-292, 1992.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Ujjwal K. Saha, S. Thotla, and Damodar Maity, “Optimum Design Configuration of Savonius Rotor through Wind Tunnel Experiments,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 96, no. 8-9, pp. 1359-1375, 2008.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Mohamed H. Mohamed et al., “Optimal Blade Shape of a Modified Savonius Turbine using an Obstacle Shielding the Returning Blade,” Energy Conversion and Management, vol. 52, no. 1, pp. 236-242, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[21] A. Dragomirescu, “Performance Assessment of a Small Wind Turbine with Crossflow Runner by Numerical Simulations,” Renewable Energy, vol. 36, no. 3, pp. 957-965, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[22] João Vicente Akwa, Horácio Antonio Vielmo, and Adriane Prisco Petry, “A Review on the Performance of Savonius Wind Turbines,” Renewable and Sustainable Energy Reviews, vol. 16, no. 5, pp. 3054-3064, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[23] A.R. Coughtrie, D.J. Borman, and Andrew Sleigh, “Effects of Turbulence Modelling on Prediction of Flow Characteristics in a Bench-Scale Anaerobic Gas-Lift Digester,” Bioresource Technology, vol. 138, pp. 297-306, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Tong Zhou, and Dietmar Rempfer, “Numerical Study of Detailed Flow Field and Performance of Savonius Wind Turbines,” Renewable Energy, vol. 51, pp. 373-381, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Konrad Kacprzak, Grzegorz Liskiewicz, and Krzysztof Sobczak, “Numerical Investigation of Conventional and Modified Savonius Wind Turbines,” Renewable Energy, vol. 60, pp. 578-585, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Ida Bagus Alit et al., “Effect of Concentrator, Blade Diameter and Blade Number on the Savonius Wind Turbine Performance,” Asian Journal of Applied Sciences, vol. 5, no. 2, pp. 343-351, 2017.
[Google Scholar]
[27] A. Damak, Zied Driss, and Mohamed Salah Abid, “Optimization of the Helical Savonius Rotor through Wind Tunnel Experiments,” Journal of Wind Engineering and Industrial Aerodynamics, vol. 174, pp. 80-93, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Nur Alom, and Ujjwal K. Saha, “Evolution and Progress in the Development of Savonius Wind Turbine Rotor Blade Profiles and Shapes,” Journal of Solar Energy Engineering, vol. 141, no. 3, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[29] A.M. Siregar, and C.A. Siregar, “Reliability Test Prototype Wind Turbine Savonius Type Helical as an Alternative Electricity Generator,” IOP Conference Series: Materials Science and Engineering, vol. 674, no. 1, pp. 1-7, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[30] W.A. El-Askary et al., “Experimental and Theoretical Studies for Improving the Performance of a Modified Shape Savonius Wind Turbine,” Journal of Energy Resources Technology, vol. 142, no. 12, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[31] A. Ciocănea et al., “Experimental Research on Increasing the Static Torque for a Small Savonius Rotor of Helical Type,” IOP Conference Series: Earth and Environmental Science, The 7th Conference of the Sustainable Solutions for Energy and Environment, Bucharest, Romania, vol. 664, no. 1, pp. 1-8, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[32] CFX Reference Guide, ANSYS Inc, 2026. [Online]. Available:
https://ansyshelp.ansys.com/public/account/secured?returnurl=/Views/Secured/corp/v251/en/cfx_ref/cfx_ref.html