Development and Design Of a 4000 Amp DC Rectifier for Industrial Metal Scrapping
| International Journal of Electrical and Electronics Engineering |
| © 2025 by SSRG - IJEEE Journal |
| Volume 12 Issue 7 |
| Year of Publication : 2025 |
| Authors : Nelson Aguilar Guevara, Jerzhinio Pineda Tito, Raúl Ricardo Sulla Torres |
10.14445/23488379/IJEEE-V12I7P115
How to Cite?
Nelson Aguilar Guevara, Jerzhinio Pineda Tito, Raúl Ricardo Sulla Torres, "Development and Design Of a 4000 Amp DC Rectifier for Industrial Metal Scrapping," SSRG International Journal of Electrical and Electronics Engineering, vol. 12, no. 7, pp. 210-220, 2025. Crossref, https://doi.org/10.14445/23488379/IJEEE-V12I7P115
Abstract:
This paper presents the development and design of a high efficiency 4000A at 12VDC DC rectifier for metal scrapping, overcoming the limitations of conventional systems such as low energy efficiency of 90-96%, inaccurate current control and frequent maintenance. The proposed system uses PWM modulation with Half-Bridge type IGBTs (15kHz), controlled by an ATmega328P microcontroller and SG3525N integrated circuit, achieving 5 times higher efficiency. An HMI system that allows precise current/voltage adjustments (±2% error), adapting to different metals needed in different ranges, such as copper, aluminum, etc. Advanced protections include alerts, a predictive maintenance system, real-time monitoring, and fast response to failures through an ATMEGA 328P microcontroller and vacuum contactors. Compared to conventional SCR-based rectifiers, the equipment provides 24% higher energy efficiency than SCR, 40% lower downtime and operating costs, and improved purity of recovered metal. This work demonstrates how modern power electronics can optimize industrial metal recycling processes, combining efficiency, automation and robustness for sustainable recovery.
Keywords:
High-current DC rectifier, Electrolytic metal recycling, IGBT-based half-bridge converter, Modbus TCP/IP control system, Predictive maintenance in power electronics.
References:
[1] Xiaoqiang Guo et al., “Impact of Narrow Pulse on High-Switching Frequency Three-Phase Current Source Rectifier” IEEE Transactions on Power Electronics, vol. 39, no. 2, pp. 2458-2467, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Kuo-Ching Tseng, Guan-Yu Huang, and Hsin-Yuan Hsiung, “Isolated High Step-Down DC–DC Converter with Current-Doubler Rectifier for Ultracapacitor Charger Applications,” International Journal of Circuit Theory and Applications, vol. 52, no. 2, pp. 582-597, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Guy Wanlongo Ndiwulu, Eduardo Vasquez Mayen, and Emmanuel De Jaeger, “Dynamic Interactions of a High-Current Thyristor-Rectifier Interfaced PEM Electrolyzer with the Angular Dynamics of Synchronous Machines” 2024 IEEE International Conference on Environment and Electrical Engineering and 2024 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe), Rome, Italy, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Alvaro Iribarren et al., “Parallel Interleaved Current Source Rectifiers for High-Power Hydrogen Electrolyzers and Optimal DC Inductance Design,” IECON 2024 - 50th Annual Conference of the IEEE Industrial Electronics Society, Chicago, IL, USA, pp. 1-6, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Xiaobin Li et al., “A High-Efficiency IPT System with Series-Capacitor Full-Bridge Configuration and Inverse Coupled Current Doubler Rectifier for High-Input, Low-Voltage, and High Output Current Applications,” IEEE Transactions on Power Electronics, vol. 39, no. 9, pp. 11849-11861, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Chunjie Li, Jianing Hu, and Mingwei Zhao, “Grid-Voltage Sensorless Predictive Current Control of Three-Phase PWM Rectifier with Fast Dynamic Response and High Accuracy,” CPSS Transactions on Power Electronics and Applications, vol. 8, no. 3, pp. 269-277, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Zoran Miletic, and Petar J. Grbović, “Analysis and Design of a Single-Phase Half-Bridge Rectifier With an Active DC Bus,” IEEE Access, vol. 12, pp. 100591-100601, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Lixiong Du, and D. Brian Ma, “Soft-Switched Isolated Half-Bridge Converter with Phase Balanced Series Capacitor Current Doubler Rectifier for Automotive Battery-to-Load Power Delivery, ” IEEE Transactions on Vehicular Technology, vol. 73, no. 9, pp. 12694-12703, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Giovano Mayer, and Alceu Andre Badin, “Design of a Double-Half-Bridge Rectifier with Single-Stage and Power Decoupling,” IEEE Access, vol. 11, pp. 117508-117519, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Zoran Miletić, Petar J. Grbović, and Igor Lopušina, “Analysis and Design of a Single-Phase Half-Bridge Rectifier/Inverter with an Active Resonant DC Bus Voltage Balancer,” 2021 23rd European Conference on Power Electronics and Applications, Ghent, Belgium, pp. 1-8, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Lei Zhao et al., “A Dual Half-Bridge Converter with Current Doubler Rectifier,” IEEE Transactions on Industrial Electronics, vol. 67, no. 8, pp. 6398-6406, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Siliang Zhang, and Xinke Wu, “Low Common Mode Noise Half-Bridge LLC DC-DC Converter with an Asymmetric Center Tapped Rectifier,” IEEE Transactions on Power Electronics, vol. 34, no. 2, pp. 1032-1037, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Jaesuk Paeng, and Gisele Azim, “Technoeconomic Analysis of the Electrorefining Process for Copper and Carbon Removal from Scrap Steel for Green Steelmaking,” Industrial and Engineering Chemistry Research, vol. 64, no. 1, pp. 613-626, 2024.[CrossRef] [Google Scholar] [Publisher Link]