Design of 1:4 Power Divider for Space Applications

International Journal of Electrical and Electronics Engineering
© 2025 by SSRG - IJEEE Journal
Volume 12 Issue 9
Year of Publication : 2025
Authors : Vikas N. Gupta, Likhit Khandelwal, Neha Gharat, Sonal Dubal
pdf
How to Cite?

Vikas N. Gupta, Likhit Khandelwal, Neha Gharat, Sonal Dubal, "Design of 1:4 Power Divider for Space Applications," SSRG International Journal of Electrical and Electronics Engineering, vol. 12,  no. 9, pp. 223-235, 2025. Crossref, https://doi.org/10.14445/23488379/IJEEE-V12I9P123

Abstract:

This paper presents a novel implementation of a compact 4-way microstrip Wilkinson power divider operating in the S-band (2-4 GHz), specifically designed for space and IoT applications. The novelty of this work lies in achieving a balanced performance between bandwidth, miniaturization, and cost-effectiveness using an economical FR-4 substrate, addressing the common trade-offs found in conventional designs where one parameter is typically compromised. A comparative study was initially conducted using four 2-way dividers simulated across FR-4 and Rogers5880 substrates, each evaluated with both sharp and curved geometries. While the Rogers-sharp combination yielded the smallest footprint, the FR-4 sharp configuration was selected for fabrication due to its cost-effectiveness and competitive performance characteristics. This design approach is particularly advantageous for systems where compactness, low cost, and acceptable RF performance are essential requirements. The fabricated divider occupies a compact area of only 51 mm × 31 mm (1581 mm²) and demonstrates excellent performance metrics. The device achieves a simulated fractional bandwidth of approximately 58.4% and a measured fractional bandwidth of 66.67% at 3 GHz. Key performance parameters include return loss exceeding -13.33 dB, insertion loss around -0.6 dB, and isolation of approximately 12.18 dB without requiring additional resistors. The measured maximum phase imbalance between output ports is limited to 2.045°, supporting coherent output distribution across all channels. Compared with recent works in the literature, this design offers a significant balance of bandwidth performance, area miniaturization, and practical manufacturability. The proposed divider is specifically optimized for ISM-band and IoT-based RF front-end systems where cost-effective compact components are essential for widespread deployment and commercial viability.

Keywords:

FR‑4, Power dividers, S-band, Wilkinson power dividers, 4‑way microstrip.

References:

[1] David M. Pozar, Microwave Engineering: Theory and Techniques, 4th ed., John Wiley & Sons, 2021.
[Google Scholar] [Publisher Link]
[2] Yongle Wu et al., “The Art of Power Dividing: A Review for State-of-the-Art Planar Power Dividers,” China Communications, vol. 14, no. 5, pp. 1-16, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Farah Bilawal et al., “The Art of Substrate-Integrated-Waveguide Power Dividers,” IEEE Access, vol. 11, pp. 9311-9325, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Jamil, Maizun, and Nurul Najwa Md Yusof, “A Review of Wilkinson Power Divider as A Splitter/Combiner Based on Method, Design and Technology,” National Conference on Research and Innovation (NCori), 2020.
[Google Scholar]
[5] İremnur Duru, “Design and Simulation of Equal Split Wilkinson Power Divider İremnur Duru1,” European Journal of Science and Technology, no. 39, pp. 59-62, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Ali-Reza Moznebi, Kambiz Afrooz, and Mostafa Danaeian, “High‐Performance Filtering Power Divider based on Air‐Filled Substrate Integrated Waveguide Technology,” ETRI Journal, vol. 45, no. 2, pp. 338-345, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Mohammad Sajad Imani, and Mohsen Hayati, “Compact Wilkinson Power Divider with Extensive Suppression of Harmonics, Using a Combination of Trapezoidal, Circular and Rectangular Resonators,” AEU-International Journal of Electronics and Communications, vol. 139, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Kübra Demir, Şehabeddin Taha İmeci, and Bilal Tütüncü, “Wideband Compact 3-Db Microstrip Power Divider For L- And S-Band Applications,” Physica Scripta, vol. 99, no. 12, 2024.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Wenxuan Liu et al., “Four-Way Waveguide Power Divider/Combiner Based on Stepped T-Junction for THz Antenna Array Application,” Journal of Infrared, Millimeter, and Terahertz Waves, vol. 44, no. 1-2, pp. 66-81, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Eko Setijadi, and Adi Pandu, “Ultrawide Band Power Divider Based on Substrate Integrated Waveguide (SIW) for S-Band Applications,” ARPN Journal of Engineering and Applied Sciences, vol. 13, no. 1, pp. 195-201, 2018.
[Google Scholar] [Publisher Link]
[11] Sahar Saleh et al., “Nonuniform Compact Ultra-Wide Band Wilkinson Power Divider with Different Unequal Split Ratios,” Journal of Electromagnetic Waves and Applications, vol. 34, no. 2, pp. 154-167, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Natarajamani S, and Rekha G. Nair, “Design Theory of Equal Split Dual-Band Power Divider Without Reactive Elements,” Advanced Electromagnetics, vol. 11, no. 3, pp. 78-83, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Mohammad Behdad Jamshidi et al., “Size Reduction and Performance Improvement of a Microstrip Wilkinson Power Divider using a Hybrid Design Technique,” Scientific Reports, vol. 11, no. 1, pp. 1-15, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Oguzhan Kizilbey et al., “A 1-4 GHz Single Stage Wilkinson Power Divider Design with Wideband Isolation Resistor,” 2021 13th International Conference on Electrical and Electronics Engineering (ELECO), Bursa, Turkey, pp. 518-521, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Razzaz Faroq, Saud M. Saeed, and Majeed A.S. Alkanhal, “Compact Ultra-Wideband Wilkinson Power Dividers using Linearly Tapered Transmission Lines,” Electronics, vol. 11, no. 19, pp. 1-10, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Charalampos Stoumpos et al., “A Compact and Broadband Four-Way Dual Polarization Waveguide Power Divider for Antenna Arrays,” 2020 14th European Conference on Antennas and Propagation (EuCAP), Copenhagen, Denmark, pp. 1-5, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Nelson J. G. Fonseca, “Broadband Waveguide Dual-Polarization Four-Way Power Divider for Small Passive Arrays,” IEEE Microwave and Wireless Components Letters, vol. 31, no. 8, pp. 985-988, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Song Guo, Kaijun Song, and Yong Fan, “Compact Four-Way Suspended-Stripline Power Divider with Low Loss and High Isolation,” International Journal of Microwave and Wireless Technologies, vol. 12, no. 8, pp. 749-753, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Yana Taryana et al., “Four-Way Power Divider Using Wilkinson Method for X-Band Radar,” 2019 International Conference on Radar, Antenna, Microwave, Electronics, and Telecommunications (ICRAMET), Tangerang, Indonesia, pp. 41-45, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Yun Liu, Sheng Sun, and Lei Zhu, “Design Of N-Way Wideband Filtering Power Dividers with Good Port-Port Isolation,” IEEE Transactions on Microwave Theory and Techniques, vol. 69, no. 7, pp. 3298-3306, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Richeng Ping, and Yang Cai Hong Ma, “A Novel Ultra‐Wideband Four‐Way Spoof Surface Plasmon Polaritons Power Divider,” International Journal of RF and Microwave Computer‐Aided Engineering, vol. 31, no. 6, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Nur Ain Rosli et al., “Wideband Four-Way Microstrip Power Divider for WLAN Application,” Journal of Engineering Research and Education (JERE), vol. 12, pp. 91-100, 2025.
[Google Scholar] [Publisher Link]
[23] Ömer Kasar, “Design and Implementation of Compact Four-Way Wilkinson Power Divider for UHF Applications,” Sigma Journal of Engineering and Natural Sciences, vol. 38, no. 4, pp. 2193-2203, 2020.
[Google Scholar] [Publisher Link]